Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles
18 Inch Insulated Flex Duct R6
$179.93The 18 Inch Insulated Flex Duct R6 is a premium solution for residential and light commercial HVAC systems. It features R6 fiberglass insulation, a reinforced inner core and a durable silver vapor barrier for reliable airflow and easier installation.
12” Insulated Flex Duct – R6
$112.4512 Inch Insulated Flex Duct R6 provides a flexible air-distribution solution for compatible residential and light commercial HVAC systems. Its reinforced inner core, R6 fiberglass insulation and durable vapor barrier support reliable supply or return airflow.
- Nominal diameter: 12 inches
- Length: 25 feet
- Insulation rating: R6
- Fiberglass thermal insulation
- Reinforced flexible inner core
- Durable exterior vapor barrier
- Suitable for compatible supply and return systems
14×10 High Capacity HVAC Media Filter
$173.36The 14×10 High Capacity HVAC Media Filter provides reliable filtration for compatible residential and light commercial HVAC systems. Its high-capacity media helps capture common airborne particles while supporting efficient system airflow.
12×10 High Capacity HVAC Media Filter
$196.81The 12×10 High Capacity HVAC Media Filter provides reliable filtration for compatible residential and light commercial HVAC systems. Its high-capacity media helps capture common airborne particles while supporting efficient system airflow.
4BV36 – DuraVent 4″ × 36″ Type B Gas Vent Pipe
$42.534BV36 by DuraVent is a 4″ × 36″ Type B gas vent pipe designed for compatible listed gas-fired appliances. Its durable double-wall construction supports reliable venting when installed as part of an approved DuraVent system.
12x24x1 MERV 10 Pleated Air Filter
$8.70The 12x24x1 MERV 10 Pleated Air Filter helps reduce dust, pollen and other common airborne particles before they circulate through your HVAC system. Its pleated design provides dependable filtration for compatible residential and light commercial equipment.
6” Insulated Flex Duct – R6
$59.51Upgrade your residential or light commercial air distribution system with our high-efficiency 6″ insulated flex duct R6. Engineered for maximum thermal retention and reliable airflow, this flexible HVAC ducting features a reinforced inner core, thick thermal fiberglass insulation, and a heavy-duty vapor barrier to prevent energy loss and condensation in challenging installation environments.
- Thermal Efficiency: Insulated with high-quality R6 fiberglass to significantly reduce heat loss and thermal transfer in unconditioned spaces like attics and crawlspaces.
- Durable Construction: Built with a reinforced flexible inner core that resists kinking and crushing, ensuring consistent airflow and system pressure.
- Moisture Protection: Features a resilient heavy-duty outer vapor barrier jacket that effectively prevents condensation buildup and protects against environmental damage.
- Flexible Installation: Designed for easy routing through tight ceiling cavities and complex framing, speeding up installation times for professional contractors.
10×8 Supply Grill TRU-103M
$14.95The 10×8 Supply Grill TRU-103M is a durable 3-way sidewall and ceiling register designed for reliable air distribution. It features steel construction, stamped louvers, an adjustable multi-shutter damper and a clean white powder-coated finish.
12×6 Supply Grill TRU-103M
$13.51The 12×6 Supply Grill TRU-103M is a durable 3-way sidewall and ceiling register designed for reliable air distribution. It features steel construction, stamped louvers, an adjustable multi-shutter damper and a clean white powder-coated finish.
4” Dryer Vent Outlet
$19.254 Inch Dryer Vent provides an exterior outlet for a compatible residential clothes dryer exhaust system. It helps discharge warm, moisture-filled air and lint outdoors when properly connected to approved 4-inch dryer ductwork.
- Nominal 4-inch dryer duct connection
- Designed for exterior dryer exhaust applications
- Helps discharge heat, moisture and lint outdoors
- Compatible with properly sized dryer vent duct
- Suitable for residential clothes dryers
- Professional installation recommended
Supply Plenum R6 19 1/2 x 19 3/4 x 36
$237.73Supply Plenum R6 19 1/2 x 19 3/4 x 36 is an insulated HVAC air-distribution component designed to connect compatible indoor equipment with the supply duct system. Its R6 insulation helps reduce unwanted heat transfer and supports dependable airflow.
- 19 1/2 x 19 3/4-inch connection dimensions
- 36-inch overall length
- R6 insulated construction
- Designed for HVAC supply-air applications
- Supports efficient air distribution
- Suitable for compatible residential systems
4 Inch Hard Pipe – 60-Inch Galvanized Duct Pipe
$14.544 Inch Hard Pipe is a 60-inch round HVAC duct manufactured from durable 30-gauge galvanized steel. Its snap-lock construction provides a practical solution for compatible residential and light commercial air-distribution installations.
12 Inch Hard Pipe – 60-Inch Galvanized Duct Pipe
$37.8712 Inch Hard Pipe is a 60-inch round HVAC duct manufactured from durable 30-gauge galvanized steel. Its snap-lock construction provides a rigid and reliable airflow path for compatible residential and light commercial duct installations.
UV Light System
$219.07Enhance your indoor air quality and protect your HVAC equipment with the UV Light System T-UV24-15. This powerful UV lamp integrates seamlessly with your filtration system to provide continuous purification.
- Air Purification: Helps inactivate harmful pathogens like SARS-CoV-2 on surfaces.
- Coil Maintenance: Disinfects HVAC coils to prevent biological growth and maintain efficiency.
- Healthier Environment: Ideal for keeping your home cleaner, healthier, and more hygienic.
- Seamless Integration: Designed for easy installation within residential HVAC systems.
30″ x 6″ Braced Heater Stand
$17.18Ensure maximum stability and code compliance for your HVAC equipment with the heavy-duty 30×6 Braced Heater Stand. Featuring a reinforced design, this stand safely elevates your furnace or air handler 6 inches off the ground.
- Dimensions: 30″ Length x 6″ Height.
- Reinforced Strength: Braced construction securely supports heavier residential and light commercial units.
- Protection: Elevates equipment to prevent cabinet rust, minor water damage, and debris buildup.
- Compliance: Helps meet local safety and mechanical codes for indoor and garage installations.
7” Start Collar w/ Damper
$15.857 Inch Start Collar with Damper creates a reliable connection between a compatible HVAC plenum or duct trunk and 7-inch round ductwork. Its integrated damper allows airflow through the connected branch to be adjusted during system setup and balancing.
- Nominal diameter: 7 inches
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Suitable for supply or return-air applications
- Useful for new installations and replacements
- Professional installation recommended
507DR89 – 9” Start Collar w/ Damper
$21.08507DR89 9 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC plenum or ductboard surface and 9-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system balancing.
- Model: 507DR89
- Nominal diameter: 9 inches
- 30-gauge galvanized steel construction
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
M&M – 1″ x 200′ 24GA Hanger Strap
$30.13Ensure superior structural support for your heaviest HVAC ducting with the premium M&M 24GA hanger strap. Proudly manufactured in the USA from solid, non-perforated galvanized steel, this industrial-grade hanging strap provides exceptional tensile strength and lasting rust resistance for both demanding residential and commercial installations.
- Industrial Thickness: Constructed from heavy-duty 24-gauge solid steel to securely support large rigid sheet metal and heavy flexible ductwork without sagging.
- Non-Perforated Design: Solid steel continuous roll allows for custom, high-strength fastening methods tailored to specific heavy-load job site requirements.
- Corrosion Resistant: Treated with a premium galvanized finish that shields the metal from rust, moisture, and degradation in unconditioned environmental spaces.
- Extended Roll Length: Comes in a massive 200-foot continuous spool (1 inch wide), providing ample material for extensive ducting layouts while reducing waste.
4” Storm Collar
$4.434 Inch Storm Collar helps protect the area where a compatible 4-inch vent pipe passes through a roof flashing. It fits around the pipe above the flashing to help direct rainwater away from the roof penetration.
- Designed for compatible 4-inch vent pipe
- Helps protect roof penetrations from rainwater
- Installs above a compatible roof flashing
- Durable metal construction
- Suitable for approved exterior vent applications
- Professional installation recommended
BVDS4BK – FAMCO 4-Inch Black Roof Vent
$21.77BVDS4BK is a durable 4-inch black roof vent manufactured by FAMCO for bathroom fan and kitchen exhaust applications. It features UV-resistant polyethylene construction, a built-in backdraft damper, bird screen and removable connection stem.
3/4” PVC Pipe Schedule 40
$5.023/4 PVC Pipe Schedule 40 provides a durable and reliable solution for compatible HVAC condensate drain line installations. Its rigid PVC construction supports clean routing and connects with compatible 3/4-inch Schedule 40 fittings.
- 3/4-inch nominal pipe size
- Schedule 40 PVC construction
- Ideal for compatible HVAC condensate drains
- Rigid construction for clean pipe routing
- Works with compatible PVC fittings
- Suitable for new installations and repairs
10′ 3x4x3 Line Set Cover with Cap
$135.92Conceal and protect your HVAC refrigerant lines, wiring, and drain hoses with the professional-grade 10′ 3x4x3 Line Set Cover with Cap. This rigid casing provides a clean, finished look while shielding vital components from physical damage.
- Dimensions: 10-foot length with a versatile 3″ x 4″ x 3″ profile.
- Protection: Shields line set insulation from pests, debris, and everyday wear.
- Aesthetics: Paintable surface blends seamlessly with any exterior siding.
- Complete Kit: Includes a precise-fitting cap for a secure closure.
6×6 Supply Grill TRU-104M
$13.17The 6×6 Supply Grill TRU-104M is a durable 4-way sidewall and ceiling register designed for balanced air distribution. It features stamped steel construction, half-inch blade spacing and a clean white powder-coated finish.
Supply Plenum R8 16 x 19 3/4 x 36
$218.78Supply Plenum R8 16 x 19 3/4 x 36 is an insulated galvanized-metal plenum designed to connect compatible indoor HVAC equipment with the supply duct system. Its R8 insulation and 26-gauge construction support dependable air distribution.
- Measures 16 x 19 3/4 x 36 inches
- R8 insulated construction
- 26-gauge galvanized metal
- Knocked-down design for assembly
- Silver exterior finish
- Made in the USA
- Designed for HVAC supply-air applications
