Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles
10 Inch Hard Pipe – 60-Inch Galvanized Duct Pipe
$40.2910 Inch Hard Pipe is a 60-inch round HVAC duct manufactured from durable 30-gauge galvanized steel. Its snap-lock construction provides a rigid and reliable airflow path for compatible residential and light commercial duct installations.
4 Inch Hard Pipe – 60-Inch Galvanized Duct Pipe
$14.544 Inch Hard Pipe is a 60-inch round HVAC duct manufactured from durable 30-gauge galvanized steel. Its snap-lock construction provides a practical solution for compatible residential and light commercial air-distribution installations.
4” Dryer Vent Outlet
$19.254 Inch Dryer Vent provides an exterior outlet for a compatible residential clothes dryer exhaust system. It helps discharge warm, moisture-filled air and lint outdoors when properly connected to approved 4-inch dryer ductwork.
- Nominal 4-inch dryer duct connection
- Designed for exterior dryer exhaust applications
- Helps discharge heat, moisture and lint outdoors
- Compatible with properly sized dryer vent duct
- Suitable for residential clothes dryers
- Professional installation recommended
4” Storm Collar
$4.434 Inch Storm Collar helps protect the area where a compatible 4-inch vent pipe passes through a roof flashing. It fits around the pipe above the flashing to help direct rainwater away from the roof penetration.
- Designed for compatible 4-inch vent pipe
- Helps protect roof penetrations from rainwater
- Installs above a compatible roof flashing
- Durable metal construction
- Suitable for approved exterior vent applications
- Professional installation recommended
4-Inch 90-Degree Elbow (Model 4BVL90)
$72.11Safely route exhaust gases from your heating equipment with the professional-grade 4-Inch 90-Degree Elbow (4BVL90). Designed for Type B gas vent systems, this double-wall elbow allows for secure and efficient directional changes in tight spaces.
- Size: 4-inch inner diameter.
- Design: 90-degree angle for precise vent routing.
- Safety: Double-wall construction maintains safe clearances to combustibles.
- Application: Ideal for gas furnaces, boilers, and water heaters.
16” Start Collar w/ Damper
$29.95507DR816 16 Inch Start Collar with Damper provides a dependable transition from compatible ductboard to 16-inch round HVAC ductwork. It features durable 28-gauge galvanized steel construction and an integrated damper for convenient airflow adjustment.
- 16-inch round duct connection
- Integrated airflow-control damper
- 28-gauge galvanized steel construction
- Compatible with 1.5-inch and 2-inch ductboard
- Suitable for residential HVAC applications
- Professional installation recommended
507DR814 – 14” Start Collar w/ Damper
$14.68507DR814 14 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC mounting surface and 14-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR814
- Nominal diameter: 14 inches
- Galvanized steel construction
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
507DR812 – 12” Start Collar w/ Damper
$20.97507DR812 12 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 12-inch round HVAC ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR812
- Nominal diameter: 12 inches
- Designed for 1½″ or 2″ ductboard
- Galvanized steel construction
- Integrated airflow damper
- Professional installation recommended
507DR810 – 10” Start Collar w/ Damper
$19.75507DR810 10 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC mounting surface and 10-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR810
- Nominal diameter: 10 inches
- Designed for compatible 1″ or 1½″ mounting material
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
507DR89 – 9” Start Collar w/ Damper
$21.08507DR89 9 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC plenum or ductboard surface and 9-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system balancing.
- Model: 507DR89
- Nominal diameter: 9 inches
- 30-gauge galvanized steel construction
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
8” Start Collar w/ Damper
$13.79507DR88 8 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 8-inch round HVAC ductwork. Its integrated damper helps regulate airflow through the connected duct branch.
- Model: 507DR88
- Nominal diameter: 8 inches
- Designed for 1½″ or 2″ ductboard
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
7” Start Collar w/ Damper
$15.857 Inch Start Collar with Damper creates a reliable connection between a compatible HVAC plenum or duct trunk and 7-inch round ductwork. Its integrated damper allows airflow through the connected branch to be adjusted during system setup and balancing.
- Nominal diameter: 7 inches
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Suitable for supply or return-air applications
- Useful for new installations and replacements
- Professional installation recommended
6” Start Collar w/ Damper
$11.396 Inch Start Collar with Damper creates a reliable connection between a compatible HVAC plenum or duct trunk and 6-inch round ductwork. Its integrated damper allows airflow through the connected branch to be adjusted during system setup and balancing.
- Nominal diameter: 6 inches
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Suitable for supply or return-air applications
- Useful for new installations and replacements
- Professional installation recommended
507DR85 – 5” Start Collar w/ Damper
$10.29507DR85 5 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 5-inch round HVAC ductwork. Its integrated damper helps regulate airflow through the connected duct branch.
- Model: 507DR85
- Nominal collar diameter: 5 inches
- Designed for 1½″ or 2″ ductboard
- Integrated airflow damper
- Suitable for compatible HVAC duct systems
- Professional installation recommended
14×8 Wall Supply Grill TRU-210VM
$36.10The 14×8 Wall Supply Grill TRU-210VM provides reliable air distribution from compatible HVAC supply ducts. Its durable wall-mounted design makes it a practical choice for residential and light commercial heating and cooling systems.
14×6 Wall Supply Grill TRU-210VM
$32.95The 14×6 Wall Supply Grill TRU-210VM provides reliable air distribution from compatible HVAC supply ducts. Its durable wall-mounted design makes it a practical choice for residential and light commercial heating and cooling systems.
12×6 Wall Supply Grill TRU-210VM
$26.99The 12×6 Wall Supply Grill TRU-210VM provides reliable air distribution from compatible HVAC supply ducts. Its practical wall-mounted design makes it suitable for residential and light commercial heating and cooling systems.
10×8 Wall Supply Grill TRU-210VM
$34.42The 10×8 Wall Supply Grill TRU-210VM provides reliable air distribution from compatible HVAC supply ducts. Its durable wall-mounted design makes it a practical choice for residential and light commercial heating and cooling systems.
10×6 Wall Supply Grill TRU-210VM
$24.54The 10×6 Wall Supply Grill TRU-210VM is an adjustable 1-way wall and ceiling register designed for controlled air distribution. It features individually adjustable blades, durable steel construction and a clean white powder-coated finish.
8×4 Wall Supply Grill TRU-210VM
$20.92The 8×4 Wall Supply Grill TRU-210VM is an adjustable 1-way wall and ceiling register designed for controlled air distribution. It features individually adjustable blades, durable steel construction and a clean white powder-coated finish.
24×24 Commercial Return Grille
$121.99The 24×24 Commercial Return Grille provides reliable return airflow for commercial HVAC systems. Its durable construction and clean design make it a practical solution for offices, retail spaces and other commercial buildings.
24×24 Return Air Filter Grille TRU-190
$97.80The 24×24 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
20×30 Return Air Filter Grille TRU-190
$75.59The 20×30 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
20×25 Return Air Filter Grille TRU-190
$58.95The 20×25 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
