8” Insulated Flex Duct – R6

$72.09

Financing Options

8 Inch Insulated Flex Duct R6 provides a flexible air-distribution solution for compatible residential and light commercial HVAC systems. Its reinforced inner core, R6 fiberglass insulation and durable vapor barrier support reliable supply or return airflow.

  • Nominal diameter: 8 inches
  • Length: 25 feet
  • Insulation rating: R6
  • Fiberglass thermal insulation
  • Reinforced flexible inner core
  • Durable exterior vapor barrier
  • Suitable for compatible supply and return systems
SKU: XPS-SUP-0004 Categories: , , Tags: ,
Description

8 Inch Insulated Flex Duct R6 provides a flexible and insulated air-distribution solution for compatible residential and light commercial HVAC systems. Its flexible design makes it easier to route conditioned air through attics, ceilings, crawlspaces and other areas where rigid ductwork may be difficult to install.

This 25-foot duct combines a reinforced flexible inner core, R6 fiberglass insulation and a durable exterior vapor barrier. When correctly sized and installed, it helps support dependable airflow while reducing unwanted heat transfer.

8 Inch Insulated Flex Duct R6 Features

  • Nominal inside diameter: 8 inches
  • Flexible duct length: 25 feet
  • Thermal insulation rating: R6
  • Fiberglass insulation material
  • Reinforced flexible inner core
  • Durable exterior vapor barrier
  • Suitable for compatible supply and return air systems
  • Designed for residential and light commercial HVAC applications

R6 Fiberglass Insulation

The R6 fiberglass insulation helps reduce heat transfer between the conditioned air inside the duct and the surrounding environment. This is especially useful when ductwork passes through an attic, crawlspace or another area outside the conditioned building envelope.

Maintaining the temperature of heated or cooled air as it moves through the system can support HVAC efficiency and indoor comfort. Actual thermal performance depends on proper installation, complete insulation coverage and correctly sealed connections.

Flexible 8-Inch HVAC Duct

The 8 Inch Insulated Flex Duct R6 has a nominal 8-inch internal diameter. Its flexible construction allows it to follow the planned HVAC layout while reducing the need for multiple separate elbows and rigid fittings.

The duct should still follow the straightest practical route. Excessive compression, sharp bends, twisting or sagging can increase resistance and reduce the amount of conditioned air reaching the intended space.

Convenient 25-Foot Length

The 25-foot length provides material for many residential branch-duct applications. A continuous section can reduce the number of intermediate joints that require fastening and sealing.

Install only the amount of duct required for the planned route. Leaving unnecessary material compressed between two connections can restrict airflow and create avoidable bends.

Reinforced Flexible Inner Core

The reinforced inner core creates the airflow pathway inside the duct. It is designed to remain flexible while maintaining its round configuration when correctly extended and supported.

Handle the core carefully during installation to prevent punctures, tears or crushed sections. Damage may allow conditioned air to escape and can reduce overall air-distribution performance.

Durable Exterior Vapor Barrier

The outer jacket acts as a vapor barrier and helps protect the fiberglass insulation. It should remain intact throughout the installation and must be properly sealed around collars, fittings and other connections.

If the exterior jacket becomes damaged, repair it with materials approved for insulated flexible HVAC ductwork. Ordinary household tape should not replace a properly rated HVAC sealing product.

Installing the 8 Inch Insulated Flex Duct R6

Before installation, verify that the 8 Inch Insulated Flex Duct R6 matches the required duct diameter and airflow calculation. Inspect the inner core, insulation and outer jacket for visible damage.

Plan the complete route before cutting the duct. Extend it along the intended path without stretching it excessively, and avoid sharp turns or unnecessary directional changes.

Connect the inner core to a compatible 8-inch collar, register boot or duct fitting. Secure the connection using an approved mechanical fastener and seal it with an HVAC-rated material.

Pull the fiberglass insulation over the completed joint without leaving gaps. Position the exterior vapor barrier over the insulation and seal it to create a continuous insulated assembly.

Proper Support and Routing

Flexible duct should be supported at suitable intervals to help prevent excessive sagging. Supports must be wide enough to avoid pinching or deforming the duct.

Do not place heavy objects on the duct. Avoid routing it across sharp surfaces or through areas where it may be crushed, punctured or otherwise damaged.

Supply and Return Air Applications

This duct may be used in compatible supply or return air systems when properly sized. Supply duct delivers conditioned air to occupied spaces, while return duct carries indoor air back to the HVAC equipment.

The suitability of an 8-inch duct depends on the airflow requirements of the installation. It should not be selected solely by matching the visible size of an existing grille or fitting.

Airflow and Duct Sizing

Correct duct sizing is essential for comfort and system performance. A duct that is too small may create excessive resistance, increased noise and insufficient air delivery.

Equipment capacity, duct length, available static pressure, number of fittings and required airflow must all be considered. A qualified HVAC professional should confirm that the 8 Inch Insulated Flex Duct R6 is appropriate for the intended branch.

Inspection and Maintenance

Periodically inspect accessible sections for disconnected joints, damaged vapor barriers, compressed areas or excessive sagging. Correcting these conditions can help prevent airflow restrictions and conditioned-air loss.

If a room experiences weak airflow or inconsistent temperatures, have the complete duct system inspected. Leakage, restrictions, incorrect sizing or equipment problems may be contributing to the condition.

Professional Installation Recommended

Professional installation of the 8 Inch Insulated Flex Duct R6 is recommended. A qualified HVAC technician can verify the required size, select an efficient route, support the duct correctly and properly seal each connection.

Explore more HVAC ducting and venting supplies from Xpress Supply. For additional information about reducing energy losses in duct systems, visit the U.S. Department of Energy duct efficiency guide.

Additional information
Weight132 lbs
Dimensions26 × 26 × 27 in
Size8″
Duct TypeFlex Duct
SpecR6
Reviews (0)

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

About XSupply
Quality HVAC parts, air filters, replacement components, and installation supplies designed to deliver reliable performance, dependable compatibility, and exceptional value for residential and commercial HVAC systems.