Rheem Select 5 Ton Air Handler 24.5″

Rheem Select 5 Ton Air Handler

The Rheem Select 5 Ton Air Handler, model WH2TY6024STANNJ, is a residential multiposition indoor unit with a 24.5-inch cabinet. It features two-stage airflow, a constant-torque motor, aluminum N-Coil, factory-installed R-454B thermal expansion valve, and an integrated A2L refrigerant detection system.

Its convertible design supports qualifying upflow, downflow, horizontal-left, and horizontal-right installations. Professional equipment matching and installation are required to achieve the intended airflow, efficiency, comfort, and safety performance.

Reliable Rheem Select 5 Ton Air Handler

The Rheem Select 5 Ton Air Handler uses a constant-torque motor with two-stage airflow to support compatible residential cooling and heat pump applications. Its rugged steel cabinet provides strength and installation versatility.

One inch of foil-faced cabinet insulation helps reduce operating sound. The unit is designed for system efficiency ratings ranging from 13.4 to 16.0 SEER2 when paired with qualifying matched HVAC equipment.

Product Features and Specifications

• Brand: Rheem Select
• Model: WH2TY6024STANNJ
• Nominal capacity: 5 tons
• Cabinet width: 24.5 inches
• Application: Residential
• Heating type: Electric heat
• Refrigerant: R-454B
• Voltage: 208–240V, single phase, 60 Hz
• Two-stage airflow
• Constant-torque motor
• Multiposition, four-way convertible design
• Factory-installed thermal expansion valve
• Aluminum indoor N-Coil
• Integrated A2L sensor and mitigation board
• One-inch foil-faced cabinet insulation
• Less than 2% cabinet air leakage at 1-inch H2O
• Weight: 178 lbs
• Published dimensions: 21 × 24 × 55 inches

Four-Way Convertible Design

The Rheem Select 5 Ton Air Handler offers a versatile four-way convertible configuration. Depending on the approved application, it can support upflow, downflow, horizontal-left, or horizontal-right installation.

This multiposition design provides flexibility for compatible residential HVAC projects. The final installation orientation must follow the applicable product instructions, clearance requirements, and condensate drainage specifications.

Aluminum Indoor N-Coil

The indoor N-Coil is constructed with aluminum fins bonded to internally grooved aluminum tubing. This aluminum design supports dependable heat transfer and provides improved corrosion resistance in qualifying indoor environments.

The factory-installed thermal expansion valve regulates refrigerant flow in compatible R-454B cooling and heat pump systems. Final system performance and efficiency depend on the complete approved equipment combination.

Integrated Refrigerant Detection System

The Rheem Select 5 Ton Air Handler includes the PlusOne® Refrigerant Detection System™, which combines an A2L sensor and mitigation board in an integrated design.

If excess refrigerant is detected, the system is designed to pause outdoor unit operation as part of its mitigation response. Its integrated configuration also supports simplified wiring and compatibility with qualifying 24V thermostat applications.

Optional Electric Heater Kits

Compatible field-installed auxiliary electric heater kits are available separately. These kits can provide supplemental electric heat and may include circuit breakers that meet applicable UL and cUL service-disconnect requirements.

The correct heater kit must be selected according to the air handler model, available electrical service, heating requirements, circuit protection, and applicable local codes.

Verify Equipment Compatibility

The Rheem Select 5 Ton Air Handler must be properly matched with a compatible outdoor air conditioner or heat pump, thermostat, refrigerant line set, electrical components, and optional heat kit.

Do not select an air handler based only on nominal tonnage or cabinet width. A qualified HVAC professional should verify the approved equipment combination, available AHRI rating, refrigerant requirements, airflow settings, voltage, dimensions, and installation orientation before ordering.

Professional Installation Required

Installation must be performed by a qualified HVAC professional according to manufacturer instructions and applicable regulations. The installer should verify electrical service, refrigerant connections, condensate drainage, airflow configuration, A2L sensor operation, thermostat compatibility, and complete system performance.

Xpress Supply sells HVAC equipment and replacement parts but does not provide installation services.

Shop Rheem Select Air Handlers

Order the Rheem Select 5 Ton Air Handler from Xpress Supply for a compatible residential HVAC installation or replacement project. Explore our Air Handler collection to compare additional Rheem and Goodman equipment options.

For manufacturer warranty coverage and registration information, visit the Rheem Warranty and Registration portal. Eligibility, coverage, registration requirements, and warranty terms may vary.