Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles
14×8 Supply Grill TRU-103M
$15.46The 14×8 Supply Grill TRU-103M is a durable 3-way sidewall and ceiling register designed for reliable air distribution. It features steel construction, stamped louvers, an adjustable multi-shutter damper and a clean white powder-coated finish.
7” Start Collar w/ Damper
$15.857 Inch Start Collar with Damper creates a reliable connection between a compatible HVAC plenum or duct trunk and 7-inch round ductwork. Its integrated damper allows airflow through the connected branch to be adjusted during system setup and balancing.
- Nominal diameter: 7 inches
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Suitable for supply or return-air applications
- Useful for new installations and replacements
- Professional installation recommended
4BVF – DuraVent 4-Inch Adjustable B-Vent Roof Flashing
$16.044BVF is an adjustable DuraVent roof flashing for compatible 4-inch Type B gas vent systems. It accommodates roof pitches from 0/12 through 6/12 and provides a properly formed transition around the vent penetration when professionally installed.
Copper Insulation 3/4 – 1-Inch Wall x 72-Inch
$16.61Copper Insulation 3/4 is flexible, closed-cell elastomeric pipe insulation designed to reduce energy loss and help prevent condensation on HVAC refrigerant piping. It features a 3/4-inch inside diameter, 1-inch wall thickness and 72-inch length.
- 3/4-inch nominal inside diameter
- 1-inch insulation wall thickness
- 72-inch overall length
- Flexible closed-cell elastomeric construction
- Helps control condensation and moisture penetration
- Temperature range from -297°F to 220°F
- Black professional finish
30″ x 6″ Braced Heater Stand
$17.18Ensure maximum stability and code compliance for your HVAC equipment with the heavy-duty 30×6 Braced Heater Stand. Featuring a reinforced design, this stand safely elevates your furnace or air handler 6 inches off the ground.
- Dimensions: 30″ Length x 6″ Height.
- Reinforced Strength: Braced construction securely supports heavier residential and light commercial units.
- Protection: Elevates equipment to prevent cabinet rust, minor water damage, and debris buildup.
- Compliance: Helps meet local safety and mechanical codes for indoor and garage installations.
8×8 Supply Grill TRU-104M
$17.97The 8×8 Supply Grill TRU-104M is a durable 4-way sidewall and ceiling register designed for balanced air distribution. It features stamped steel construction, an adjustable multi-shutter damper and a clean white powder-coated finish.
Hanging Strap
$18.06Achieve maximum organization and structural security for your HVAC and electrical installations with our premium TRADEPRO 36 natural duct straps. Engineered from high-quality durable nylon, these heavy-duty 36-inch hanging straps are designed to provide maximum tensile strength, reliably securing flexible conduit, thick wire cables, and heavy component bundles in demanding commercial and residential environments.
- High-Capacity Bundling: Specifically designed with an extended 36-inch length to easily accommodate large conduits ranging from 7 inches to 15 inches in diameter.
- Ergonomic Safety Design: Features a specially engineered curved, rounded tip for incredibly smooth insertion into tight spaces while protecting the user’s hands from sharp edges.
- Maximum Tensile Strength: Manufactured from premium nylon for extended durability, ensuring your heavy cables and duct accessories remain firmly in place without snapping.
- Contractor Bulk Value: Comes in a convenient package quantity of 50 straps, providing ample supply for large-scale professional installation projects.
10×10 Supply Grill TRU-104M
$18.68The 10×10 Supply Grill TRU-104M is a durable 4-way sidewall and ceiling register designed for balanced air distribution. It features stamped steel construction, an adjustable multi-shutter damper and a clean white powder-coated finish.
4” Dryer Vent Outlet
$19.254 Inch Dryer Vent provides an exterior outlet for a compatible residential clothes dryer exhaust system. It helps discharge warm, moisture-filled air and lint outdoors when properly connected to approved 4-inch dryer ductwork.
- Nominal 4-inch dryer duct connection
- Designed for exterior dryer exhaust applications
- Helps discharge heat, moisture and lint outdoors
- Compatible with properly sized dryer vent duct
- Suitable for residential clothes dryers
- Professional installation recommended
507DR810 – 10” Start Collar w/ Damper
$19.75507DR810 10 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC mounting surface and 10-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR810
- Nominal diameter: 10 inches
- Designed for compatible 1″ or 1½″ mounting material
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
4BV12 – DuraVent 4″ × 12″ Type B Gas Vent Pipe
$19.904BV12 by DuraVent is a 4″ × 12″ Type B gas vent pipe designed for compatible listed gas-fired appliances. Its double-wall construction combines an aluminum inner wall with a durable galvanized steel exterior and is UL Listed.
8×4 Wall Supply Grill TRU-210VM
$20.92The 8×4 Wall Supply Grill TRU-210VM is an adjustable 1-way wall and ceiling register designed for controlled air distribution. It features individually adjustable blades, durable steel construction and a clean white powder-coated finish.
507DR812 – 12” Start Collar w/ Damper
$20.97507DR812 12 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 12-inch round HVAC ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR812
- Nominal diameter: 12 inches
- Designed for 1½″ or 2″ ductboard
- Galvanized steel construction
- Integrated airflow damper
- Professional installation recommended
507DR89 – 9” Start Collar w/ Damper
$21.08507DR89 9 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC plenum or ductboard surface and 9-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system balancing.
- Model: 507DR89
- Nominal diameter: 9 inches
- 30-gauge galvanized steel construction
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
8x4x5 Register Box R6
$21.24The 8x4x5 Register Box R6 connects compatible HVAC ductwork to a supply register or grille. Its insulated construction helps reduce heat transfer and supports dependable airflow in residential and light commercial systems.
4BV18 – DuraVent 4″ × 18″ Type B Gas Vent Pipe
$21.454BV18 by DuraVent is a 4″ × 18″ Type B gas vent pipe for compatible listed gas-fired appliances. Its double-wall construction features an aluminum inner liner, a durable galvanized steel exterior and UL approval.
BVDS4BK – FAMCO 4-Inch Black Roof Vent
$21.77BVDS4BK is a durable 4-inch black roof vent manufactured by FAMCO for bathroom fan and kitchen exhaust applications. It features UV-resistant polyethylene construction, a built-in backdraft damper, bird screen and removable connection stem.
10x6x6 Register Box R6
$22.42The 10x6x6 Register Box R6 connects compatible HVAC ductwork to a supply register or grille. Its insulated construction helps reduce heat transfer and supports dependable airflow in residential and light commercial systems.
10x8x6 Register Box R6
$22.77The 10x8x6 Register Box R6 connects compatible HVAC ductwork to a supply register or grille. Its insulated construction helps reduce heat transfer and supports dependable airflow in residential and light commercial systems.
12x6x7 Register Box R6
$22.95The 12x6x7 Register Box R6 connects compatible HVAC ductwork to a supply register or grille. Its insulated construction helps reduce heat transfer and supports dependable airflow in residential and light commercial systems.
10×6 Wall Supply Grill TRU-210VM
$24.54The 10×6 Wall Supply Grill TRU-210VM is an adjustable 1-way wall and ceiling register designed for controlled air distribution. It features individually adjustable blades, durable steel construction and a clean white powder-coated finish.
M&M 8 Inch Snaplock Duct Pipe – 60-Inch 30GA Galvanized
$25.858 Inch Snaplock Duct Pipe by M&M is a 60-inch round HVAC duct manufactured in the USA from durable 30-gauge galvanized steel. Its snap-lock closure provides a rigid airflow path for compatible residential and light commercial duct installations.
12×12 Return Air Filter Grille TRU-190
$26.42The 12×12 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
10x8x7 Register Box R6
$26.95The 10x8x7 Register Box R6 connects compatible HVAC ductwork to a supply register or grille. Its insulated construction helps reduce heat transfer and supports dependable airflow in residential and light commercial systems.
