Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles
4” Dryer Vent Outlet
$19.254 Inch Dryer Vent provides an exterior outlet for a compatible residential clothes dryer exhaust system. It helps discharge warm, moisture-filled air and lint outdoors when properly connected to approved 4-inch dryer ductwork.
- Nominal 4-inch dryer duct connection
- Designed for exterior dryer exhaust applications
- Helps discharge heat, moisture and lint outdoors
- Compatible with properly sized dryer vent duct
- Suitable for residential clothes dryers
- Professional installation recommended
4” Storm Collar
$4.434 Inch Storm Collar helps protect the area where a compatible 4-inch vent pipe passes through a roof flashing. It fits around the pipe above the flashing to help direct rainwater away from the roof penetration.
- Designed for compatible 4-inch vent pipe
- Helps protect roof penetrations from rainwater
- Installs above a compatible roof flashing
- Durable metal construction
- Suitable for approved exterior vent applications
- Professional installation recommended
4-Inch 90-Degree Elbow (Model 4BVL90)
$72.11Safely route exhaust gases from your heating equipment with the professional-grade 4-Inch 90-Degree Elbow (4BVL90). Designed for Type B gas vent systems, this double-wall elbow allows for secure and efficient directional changes in tight spaces.
- Size: 4-inch inner diameter.
- Design: 90-degree angle for precise vent routing.
- Safety: Double-wall construction maintains safe clearances to combustibles.
- Application: Ideal for gas furnaces, boilers, and water heaters.
14” Turning Vane R6
$53.3714 Inch Turning Vane R6 is an insulated HVAC duct fitting designed to redirect air while supporting smooth and efficient airflow. Its R6 insulation helps reduce heat transfer and makes it suitable for residential air-distribution installations.
- Nominal 14-inch HVAC duct connection
- R6 insulated construction
- Designed to redirect airflow efficiently
- Helps reduce turbulence around duct transitions
- Suitable for residential HVAC duct systems
- Professional installation recommended
16” Start Collar w/ Damper
$29.95507DR816 16 Inch Start Collar with Damper provides a dependable transition from compatible ductboard to 16-inch round HVAC ductwork. It features durable 28-gauge galvanized steel construction and an integrated damper for convenient airflow adjustment.
- 16-inch round duct connection
- Integrated airflow-control damper
- 28-gauge galvanized steel construction
- Compatible with 1.5-inch and 2-inch ductboard
- Suitable for residential HVAC applications
- Professional installation recommended
507DR814 – 14” Start Collar w/ Damper
$14.68507DR814 14 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC mounting surface and 14-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR814
- Nominal diameter: 14 inches
- Galvanized steel construction
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
507DR812 – 12” Start Collar w/ Damper
$20.97507DR812 12 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 12-inch round HVAC ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR812
- Nominal diameter: 12 inches
- Designed for 1½″ or 2″ ductboard
- Galvanized steel construction
- Integrated airflow damper
- Professional installation recommended
507DR810 – 10” Start Collar w/ Damper
$19.75507DR810 10 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC mounting surface and 10-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR810
- Nominal diameter: 10 inches
- Designed for compatible 1″ or 1½″ mounting material
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
507DR89 – 9” Start Collar w/ Damper
$21.08507DR89 9 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC plenum or ductboard surface and 9-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system balancing.
- Model: 507DR89
- Nominal diameter: 9 inches
- 30-gauge galvanized steel construction
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
8” Start Collar w/ Damper
$13.79507DR88 8 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 8-inch round HVAC ductwork. Its integrated damper helps regulate airflow through the connected duct branch.
- Model: 507DR88
- Nominal diameter: 8 inches
- Designed for 1½″ or 2″ ductboard
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
7” Start Collar w/ Damper
$15.857 Inch Start Collar with Damper creates a reliable connection between a compatible HVAC plenum or duct trunk and 7-inch round ductwork. Its integrated damper allows airflow through the connected branch to be adjusted during system setup and balancing.
- Nominal diameter: 7 inches
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Suitable for supply or return-air applications
- Useful for new installations and replacements
- Professional installation recommended
6” Start Collar w/ Damper
$11.396 Inch Start Collar with Damper creates a reliable connection between a compatible HVAC plenum or duct trunk and 6-inch round ductwork. Its integrated damper allows airflow through the connected branch to be adjusted during system setup and balancing.
- Nominal diameter: 6 inches
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Suitable for supply or return-air applications
- Useful for new installations and replacements
- Professional installation recommended
507DR85 – 5” Start Collar w/ Damper
$10.29507DR85 5 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 5-inch round HVAC ductwork. Its integrated damper helps regulate airflow through the connected duct branch.
- Model: 507DR85
- Nominal collar diameter: 5 inches
- Designed for 1½″ or 2″ ductboard
- Integrated airflow damper
- Suitable for compatible HVAC duct systems
- Professional installation recommended
14×8 Wall Supply Grill TRU-210VM
$36.10The 14×8 Wall Supply Grill TRU-210VM provides reliable air distribution from compatible HVAC supply ducts. Its durable wall-mounted design makes it a practical choice for residential and light commercial heating and cooling systems.
14×6 Wall Supply Grill TRU-210VM
$32.95The 14×6 Wall Supply Grill TRU-210VM provides reliable air distribution from compatible HVAC supply ducts. Its durable wall-mounted design makes it a practical choice for residential and light commercial heating and cooling systems.
12×6 Wall Supply Grill TRU-210VM
$26.99The 12×6 Wall Supply Grill TRU-210VM provides reliable air distribution from compatible HVAC supply ducts. Its practical wall-mounted design makes it suitable for residential and light commercial heating and cooling systems.
10×8 Wall Supply Grill TRU-210VM
$34.42The 10×8 Wall Supply Grill TRU-210VM provides reliable air distribution from compatible HVAC supply ducts. Its durable wall-mounted design makes it a practical choice for residential and light commercial heating and cooling systems.
10×6 Wall Supply Grill TRU-210VM
$24.54The 10×6 Wall Supply Grill TRU-210VM is an adjustable 1-way wall and ceiling register designed for controlled air distribution. It features individually adjustable blades, durable steel construction and a clean white powder-coated finish.
8×4 Wall Supply Grill TRU-210VM
$20.92The 8×4 Wall Supply Grill TRU-210VM is an adjustable 1-way wall and ceiling register designed for controlled air distribution. It features individually adjustable blades, durable steel construction and a clean white powder-coated finish.
24×24 Commercial Return Grille
$121.99The 24×24 Commercial Return Grille provides reliable return airflow for commercial HVAC systems. Its durable construction and clean design make it a practical solution for offices, retail spaces and other commercial buildings.
24×24 Return Air Filter Grille TRU-190
$97.80The 24×24 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
20×30 Return Air Filter Grille TRU-190
$75.59The 20×30 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
20×25 Return Air Filter Grille TRU-190
$58.95The 20×25 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
20×20 Return Air Filter Grille TRU-190
$59.73The 20×20 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
