Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles
7” Insulated Flex Duct – R6
$66.557 Inch Insulated Flex Duct R6 provides a flexible and insulated air-distribution solution for compatible residential and light commercial HVAC systems. Its 25-foot length, reinforced inner core, fiberglass insulation and durable vapor barrier support reliable supply or return airflow.
- Nominal diameter: 7 inches
- Length: 25 feet
- Insulation rating: R6
- Fiberglass thermal insulation
- Reinforced flexible inner core
- Durable exterior vapor barrier
- Suitable for compatible supply and return systems
UV Copper Insulation
$93.38UV Copper Insulation helps protect HVAC refrigerant piping against sunlight, weather exposure, condensation and unwanted heat transfer. Its durable insulated construction is ideal for outdoor copper lines used with compatible air-conditioning and heat-pump systems.
- Designed for outdoor HVAC refrigerant piping
- Helps protect insulation against UV exposure
- Reduces condensation on cold copper lines
- Helps limit unwanted heat transfer
- Creates a clean, professional installation
- Suitable for compatible air conditioners and heat pumps
8×4 Wall Supply Grill TRU-210VM
$20.92The 8×4 Wall Supply Grill TRU-210VM is an adjustable 1-way wall and ceiling register designed for controlled air distribution. It features individually adjustable blades, durable steel construction and a clean white powder-coated finish.
16” Motorized Damper – 24V Power Open/Close
$183.1816 Inch Motorized Damper provides automatic airflow control for compatible HVAC zoning and ventilation systems. Its 24V motor powers the round damper blade in both directions, while red and green LEDs clearly indicate the fully closed or open position.
- 16-inch nominal round connection
- 24-volt motor operation
- Power-open and power-close design
- Single-leaf round damper
- Red LED indicates fully closed
- Green LED indicates fully open
- Three-wire electrical connection
14×8 Supply Grill TRU-103M
$15.46The 14×8 Supply Grill TRU-103M is a durable 3-way sidewall and ceiling register designed for reliable air distribution. It features steel construction, stamped louvers, an adjustable multi-shutter damper and a clean white powder-coated finish.
12x6x7 Register Box R6
$22.95The 12x6x7 Register Box R6 connects compatible HVAC ductwork to a supply register or grille. Its insulated construction helps reduce heat transfer and supports dependable airflow in residential and light commercial systems.
8” Start Collar w/ Damper
$13.79507DR88 8 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 8-inch round HVAC ductwork. Its integrated damper helps regulate airflow through the connected duct branch.
- Model: 507DR88
- Nominal diameter: 8 inches
- Designed for 1½″ or 2″ ductboard
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
12×12 Return Air Filter Grille TRU-190
$26.42The 12×12 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
Hanging Strap
$18.06Achieve maximum organization and structural security for your HVAC and electrical installations with our premium TRADEPRO 36 natural duct straps. Engineered from high-quality durable nylon, these heavy-duty 36-inch hanging straps are designed to provide maximum tensile strength, reliably securing flexible conduit, thick wire cables, and heavy component bundles in demanding commercial and residential environments.
- High-Capacity Bundling: Specifically designed with an extended 36-inch length to easily accommodate large conduits ranging from 7 inches to 15 inches in diameter.
- Ergonomic Safety Design: Features a specially engineered curved, rounded tip for incredibly smooth insertion into tight spaces while protecting the user’s hands from sharp edges.
- Maximum Tensile Strength: Manufactured from premium nylon for extended durability, ensuring your heavy cables and duct accessories remain firmly in place without snapping.
- Contractor Bulk Value: Comes in a convenient package quantity of 50 straps, providing ample supply for large-scale professional installation projects.
Copper Insulation 3/4 – 1-Inch Wall x 72-Inch
$16.61Copper Insulation 3/4 is flexible, closed-cell elastomeric pipe insulation designed to reduce energy loss and help prevent condensation on HVAC refrigerant piping. It features a 3/4-inch inside diameter, 1-inch wall thickness and 72-inch length.
- 3/4-inch nominal inside diameter
- 1-inch insulation wall thickness
- 72-inch overall length
- Flexible closed-cell elastomeric construction
- Helps control condensation and moisture penetration
- Temperature range from -297°F to 220°F
- Black professional finish
6×6 Supply Grill TRU-104M
$13.17The 6×6 Supply Grill TRU-104M is a durable 4-way sidewall and ceiling register designed for balanced air distribution. It features stamped steel construction, half-inch blade spacing and a clean white powder-coated finish.
4” Storm Collar
$4.434 Inch Storm Collar helps protect the area where a compatible 4-inch vent pipe passes through a roof flashing. It fits around the pipe above the flashing to help direct rainwater away from the roof penetration.
- Designed for compatible 4-inch vent pipe
- Helps protect roof penetrations from rainwater
- Installs above a compatible roof flashing
- Durable metal construction
- Suitable for approved exterior vent applications
- Professional installation recommended
16 Inch Insulated Flex Duct R6
$168.13The 16 Inch Insulated Flex Duct R6 is a premium solution for residential and light commercial HVAC systems. It features R6 fiberglass insulation, a reinforced inner core and a durable silver vapor barrier for reliable airflow and easier installation.
10x8x7 Register Box R6
$26.95The 10x8x7 Register Box R6 connects compatible HVAC ductwork to a supply register or grille. Its insulated construction helps reduce heat transfer and supports dependable airflow in residential and light commercial systems.
6” Start Collar w/ Damper
$11.396 Inch Start Collar with Damper creates a reliable connection between a compatible HVAC plenum or duct trunk and 6-inch round ductwork. Its integrated damper allows airflow through the connected branch to be adjusted during system setup and balancing.
- Nominal diameter: 6 inches
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Suitable for supply or return-air applications
- Useful for new installations and replacements
- Professional installation recommended
507DR89 – 9” Start Collar w/ Damper
$21.08507DR89 9 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC plenum or ductboard surface and 9-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system balancing.
- Model: 507DR89
- Nominal diameter: 9 inches
- 30-gauge galvanized steel construction
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
30″ x 6″ Braced Heater Stand
$17.18Ensure maximum stability and code compliance for your HVAC equipment with the heavy-duty 30×6 Braced Heater Stand. Featuring a reinforced design, this stand safely elevates your furnace or air handler 6 inches off the ground.
- Dimensions: 30″ Length x 6″ Height.
- Reinforced Strength: Braced construction securely supports heavier residential and light commercial units.
- Protection: Elevates equipment to prevent cabinet rust, minor water damage, and debris buildup.
- Compliance: Helps meet local safety and mechanical codes for indoor and garage installations.
4” Dryer Vent Outlet
$19.254 Inch Dryer Vent provides an exterior outlet for a compatible residential clothes dryer exhaust system. It helps discharge warm, moisture-filled air and lint outdoors when properly connected to approved 4-inch dryer ductwork.
- Nominal 4-inch dryer duct connection
- Designed for exterior dryer exhaust applications
- Helps discharge heat, moisture and lint outdoors
- Compatible with properly sized dryer vent duct
- Suitable for residential clothes dryers
- Professional installation recommended
10′ 3x4x3 Line Set Cover with Cap
$135.92Conceal and protect your HVAC refrigerant lines, wiring, and drain hoses with the professional-grade 10′ 3x4x3 Line Set Cover with Cap. This rigid casing provides a clean, finished look while shielding vital components from physical damage.
- Dimensions: 10-foot length with a versatile 3″ x 4″ x 3″ profile.
- Protection: Shields line set insulation from pests, debris, and everyday wear.
- Aesthetics: Paintable surface blends seamlessly with any exterior siding.
- Complete Kit: Includes a precise-fitting cap for a secure closure.
36 Inch Gas Flex with Valve – 5/8″ Gas Connector
$33.2936 Inch Gas Flex with Valve provides a flexible connection for compatible gas appliances. It features a 36-inch length, 5/8-inch connector body, 1/2-inch male connections and a shutoff valve for a complete professional installation.
4BV36 – DuraVent 4″ × 36″ Type B Gas Vent Pipe
$42.534BV36 by DuraVent is a 4″ × 36″ Type B gas vent pipe designed for compatible listed gas-fired appliances. Its durable double-wall construction supports reliable venting when installed as part of an approved DuraVent system.
Return Plenum 12.5×23.125×48
$219.62Plenums that precisely fit equipment from leading manufacturers. We offer options to customize our plenums to meet the demands of markets nationwide, including:
- 12.5″ x 23″ x 48″
- Two-piece L-shaped side construction
- Four-piece construction
- Beaded for added strength
UV Light System
$219.07Enhance your indoor air quality and protect your HVAC equipment with the UV Light System T-UV24-15. This powerful UV lamp integrates seamlessly with your filtration system to provide continuous purification.
- Air Purification: Helps inactivate harmful pathogens like SARS-CoV-2 on surfaces.
- Coil Maintenance: Disinfects HVAC coils to prevent biological growth and maintain efficiency.
- Healthier Environment: Ideal for keeping your home cleaner, healthier, and more hygienic.
- Seamless Integration: Designed for easy installation within residential HVAC systems.
18” Insulated Flex Duct – R8
$232.8418 Inch Insulated Flex Duct R8 is a 25-foot flexible air duct designed for residential and light commercial HVAC systems. It features R8 fiberglass insulation, a reinforced flexible inner core, and a durable silver vapor barrier for compatible supply and return-air applications.
- Nominal diameter: 18 inches
- Overall length: 25 feet
- Insulation rating: R8
- Fiberglass insulation
- Reinforced flexible inner core
- Heavy-duty silver vapor barrier
- Suitable for supply and return-air systems
