Goodman 2.5 Ton 14.3 SEER2 Air Conditioner Condenser

The GLXS4BA3010 is a Goodman 2.5 ton air conditioner condenser designed to provide dependable cooling for compatible residential HVAC applications. This outdoor unit uses R-32 refrigerant and delivers a nominal cooling capacity of 30,000 BTU. Its single-stage compressor provides straightforward and consistent operation for properly sized systems.

Part of the Goodman GLXS4B Series, this condenser combines an energy-efficient compressor, copper tubing, enhanced aluminum fins, and a durable steel cabinet. It is intended for straight-cool air-conditioning applications and must be paired with compatible R-32 indoor equipment.

GLXS4BA3010 Features and Benefits

The GLXS4BA3010 includes practical features designed to support dependable cooling performance, effective heat transfer, outdoor equipment protection, and convenient professional service.

• Nominal 2.5 ton cooling capacity
• Approximately 30,000 BTU per hour
• 14.3 SEER2 efficiency with qualifying equipment combinations
• Designed specifically for R-32 refrigerant
• Energy-efficient single-stage compressor
• Copper tube and enhanced aluminum fin coil
• Factory-installed liquid-line filter drier
• Factory charged for approximately 15 feet of tubing
• Heavy-gauge galvanized-steel cabinet
• Durable powder-paint cabinet finish
• Steel louver coil guard
• Top-discharge condenser fan design
• High-pressure safety switch
• Accessible service valves and gauge ports
• AHRI certified and ETL listed

GLXS4BA3010 Product Specifications

The GLXS4BA3010 must be combined with approved indoor equipment to achieve its published capacity and SEER2 rating. Actual system performance depends on the evaporator coil or air handler, furnace, blower airflow, refrigerant charge, ductwork, installation conditions, and applicable AHRI-certified combination.

• Manufacturer: Goodman
• Series: GLXS4B
• Model: GLXS4BA3010
• Equipment type: Split-system air conditioner condenser
• System type: Straight cool
• Nominal capacity: 2.5 tons
• Nominal cooling capacity: 30,000 BTU
• Efficiency: 14.3 SEER2 with qualifying system match
• Refrigerant: R-32
• Factory refrigerant charge: Approximately 63 ounces
• Compressor: Single stage
• Outdoor coil: Copper tubing with enhanced aluminum fins
• Voltage: 208/230 volts
• Phase: Single phase
• Frequency: 60 Hz
• Minimum circuit ampacity: Approximately 15 amps
• Maximum overcurrent protection: 25 amps
• Liquid-line connection: 3/8 inch
• Suction-line connection: 3/4 inch
• Sound rating: Approximately 71 dB
• Dimensions: Approximately 32 inches high × 29 inches wide × 29 inches deep
• Equipment weight: Approximately 115 pounds
• Application: Residential cooling systems

Dependable Single-Stage Cooling

This Goodman condenser uses a single-stage compressor that operates at full capacity whenever cooling is required. This straightforward design makes the unit a practical choice for properties that need consistent performance from a correctly sized 2.5 ton air-conditioning system.

The published 14.3 SEER2 rating depends on the complete matched system. The outdoor condenser alone does not determine final efficiency. The indoor evaporator coil, air handler or furnace, blower motor, ductwork, refrigerant charge, and airflow settings all influence cooling capacity and energy consumption.

Designed for R-32 Refrigerant

The GLXS4BA3010 is engineered specifically for R-32 refrigerant. It must only be paired with indoor equipment designed and approved for R-32. Components manufactured exclusively for R-410A or R-454B systems should not be connected to this condenser unless Goodman expressly approves the combination.

R-32 is classified as an A2L refrigerant. Installation, charging, refrigerant-line preparation, service, and system commissioning must follow Goodman instructions and applicable safety codes. Compatible indoor equipment must include the required refrigerant detection and mitigation components.

Durable Outdoor Construction

The heavy-gauge galvanized-steel cabinet helps protect internal components from weather and common outdoor hazards. A steel louver coil guard protects the condenser coil, while the powder-paint finish provides additional durability for outdoor installation.

The copper tube and enhanced aluminum fin coil promotes effective heat transfer during normal cooling operation. A factory-installed filter drier helps capture moisture and contaminants within the refrigerant circuit, supporting system cleanliness and dependable performance.

Installation and Line-Set Requirements

This model uses a 3/8-inch liquid line and a 3/4-inch suction line for standard system applications. The exact line-set size and maximum allowable refrigerant-line length must be verified using Goodman installation instructions before completing the installation.

The condenser should be placed on a stable and level outdoor pad. Manufacturer-required clearances must be maintained around the cabinet to provide sufficient airflow, effective heat rejection, and access for inspections and service.

System Compatibility

Before purchasing the GLXS4BA3010, verify the property’s cooling load, electrical service, indoor equipment, refrigerant type, line-set dimensions, airflow requirements, thermostat, and applicable AHRI combination. Matching HVAC equipment by tonnage alone does not guarantee compatibility.

A professional Manual J load calculation is recommended when selecting system capacity. Installing oversized or undersized equipment can negatively affect temperature control, humidity removal, energy consumption, equipment cycling, and long-term reliability.

Professional Installation Required

Professional installation of the GLXS4BA3010 by a qualified HVAC technician is required. Correct placement, electrical protection, brazing, nitrogen purging, evacuation, refrigerant charging, airflow adjustment, and operational testing are essential for safe and dependable performance.

Explore additional air conditioner condensers from Xpress Supply or review the official Goodman GLXS4B product information.