Goodman 3 Ton Horizontal Evaporator Coil

The CHPTA3630C3 Evaporator Coil is a Goodman 3 ton horizontal cased coil designed for compatible R-32 air conditioning and heat pump systems. Its horizontal configuration makes it suitable for residential applications where vertical installation is not appropriate.

Goodman’s AlumaFin7™ all-aluminum design supports efficient heat transfer and dependable indoor cooling performance. A factory-installed thermal expansion valve helps regulate refrigerant flow when the coil is paired with approved outdoor equipment.

CHPTA3630C3 Evaporator Coil Features

• 3 ton nominal cooling capacity
• Horizontal cased-coil configuration
• Designed for compatible R-32 systems
• All-aluminum evaporator coil construction
• Factory-installed thermal expansion valve
• Factory-installed R-32 refrigerant sensor
• Rust-resistant thermoplastic drain pan
• Foil-faced cabinet insulation
• Single front access panel
• AHRI certified and ETL listed

This Goodman horizontal coil has a 30-inch-wide cabinet and a compact 21-inch depth. Its cabinet design helps simplify installation in compatible horizontal residential HVAC applications, including certain attic and crawl-space configurations.

CHPTA3630C3 Evaporator Coil Specifications

• Brand: Goodman
• Model: CHPTA3630C3
• Equipment type: Horizontal cased evaporator coil
• Nominal capacity: 3 tons
• Nominal cooling capacity: Approximately 36,000 BTU per hour
• Refrigerant: R-32
• Configuration: Horizontal
• Metering device: Factory-installed TXV
• Coil construction: All aluminum
• Dimensions: 21 inches high × 30 inches wide × 21 inches deep
• Liquid-line connection: 3/8 inch
• Suction-line connection: 7/8 inch
• Product weight: Approximately 70 pounds

System Compatibility

The CHPTA3630C3 Evaporator Coil must be installed with compatible R-32 outdoor equipment and a properly selected furnace or indoor blower. Nominal tonnage alone does not confirm equipment compatibility or a particular efficiency rating.

Before purchasing this Goodman coil, verify the outdoor-unit model, refrigerant type, available installation space, airflow requirements, refrigerant line sizes, furnace or blower compatibility, and applicable AHRI-certified combination.

R-32 Refrigerant Requirements

This model is designed specifically for compatible R-32 HVAC systems. R-32 is classified as an A2L refrigerant and requires approved equipment, components, tools, procedures, and safety practices. It must not be installed with incompatible R-410A equipment.

Professional Installation Recommended

The CHPTA3630C3 Evaporator Coil should be installed by a qualified HVAC professional. Proper installation includes confirming the horizontal orientation, equipment compatibility, airflow, refrigerant piping, condensate drainage, leak testing, evacuation, and system commissioning.

Compare additional evaporator coils from Xpress Supply or review the official Goodman CHPTA product information.