MHCDLS30 – mFurnace™ Coil Cabinet, Downflow, Louvered Door, Solid Top, 30.50″ Height

The MHCDLS30 is an ADP mFurnace™ coil cabinet designed for downflow manufactured housing HVAC installations. It provides an enclosure for a compatible uncased evaporator coil and connects with an approved ADP manufactured home electric furnace. This configuration includes a louvered door, solid top, and a 30.5-inch cabinet height.

This product is a coil cabinet accessory only. It does not include an electric furnace, blower, evaporator coil, outdoor condenser, heat pump, refrigerant components, thermostat, or complete HVAC system unless those components are specifically listed in a separate product bundle.

MHCDLS30 Product Overview

The MHCDLS30 is part of ADP’s manufactured housing accessory line for the mFurnace™ platform. Its downflow configuration positions the coil cabinet above the furnace so conditioned air can move through the properly installed evaporator coil and furnace assembly.

The louvered front door supports the cabinet’s return-air and filtration arrangement, while the solid top closes the upper portion of the enclosure. ADP specifies one 20 × 30 × 1-inch filter for this cabinet configuration.

What’s Included

• MHCDLS30 manufactured home coil cabinet
• Louvered front door assembly
• Solid top panel
• Cabinet side and rear panels
• Filter-retaining components
• Cabinet assembly hardware

Inspect the package before installation and confirm all components against the manufacturer’s instructions. The evaporator coil, filter, furnace, refrigerant piping, electrical components, fasteners required for the building structure, and installation materials may be supplied separately.

Key Features

• Manufactured housing application: Designed for compatible mobile home HVAC installations.
• Downflow configuration: Intended for use above a compatible downflow ADP mFurnace™.
• Louvered door: Supports the specified return-air and filter configuration.
• Solid top: Provides the closed-top arrangement identified by the final S in the model number.
• Coil accommodation: Accepts compatible ADP M Series uncased coils measuring up to 25 inches high.
• Filter provision: Designed to use one 20 × 30 × 1-inch filter in the door arrangement.
• Service access: Removable door allows access to the installed coil and filter.
• Modular construction: Cabinet components assemble as part of the approved furnace and coil installation.

MHCDLS30 Technical Specifications

• Manufacturer: Advanced Distributor Products (ADP)
• Product line: mFurnace™ accessories
• Model: MHCDLS30
• Product type: Manufactured home evaporator coil cabinet
• Airflow configuration: Downflow
• Door type: Louvered
• Top configuration: Solid
• Cabinet height: 30.5 inches
• Cabinet width: 19.8 inches
• Cabinet depth: 23.5 inches
• Specified filter size: 20 × 30 × 1 inches
• Filter quantity: One
• Maximum compatible coil height: 25 inches
• Application: Manufactured housing
• Furnace: Not included
• Evaporator coil: Not included

Coil Compatibility

The MHCDLS30 accommodates compatible ADP M Series manufactured housing evaporator coils with an overall coil height of no more than 25 inches. Coil compatibility must be determined using the complete model number, physical dimensions, airflow requirements, metering device, refrigerant, and matched outdoor equipment.

This cabinet does not have an independent tonnage rating. Cooling capacity is determined by the installed evaporator coil and the complete matched HVAC system. Do not select the cabinet using tonnage alone.

Browse compatible evaporator coils or view available mobile home HVAC systems.

Furnace Compatibility

The MHCDLS30 is designed to connect with a compatible ADP mFurnace™ in a downflow installation. ADP’s mFurnace cabinet is approximately 33 inches high, producing an assembled furnace and MHCDLS30 cabinet height of approximately 63.5 inches before accounting for required clearances and other installation conditions.

The installer must confirm that the furnace model, coil cabinet, evaporator coil, filter arrangement, floor opening, duct connections, refrigerant tubing, wiring, and available closet or alcove space are compatible.

Air Conditioner and Heat Pump Applications

The MHCDLS30 can house a compatible evaporator coil used with either an air-conditioning or heat pump system. The cabinet itself does not determine the refrigerant, efficiency rating, heating method, or system type.

Refrigerant compatibility comes from the installed coil, metering device, and outdoor equipment. Verify whether the complete system uses R-454B, R-32, or another approved refrigerant before installation.

Efficiency Information

This coil cabinet does not have a standalone SEER2, EER2, or HSPF2 rating. Efficiency ratings apply to complete matched systems consisting of the outdoor unit, evaporator coil, indoor blower or furnace, and other required components. Consult the applicable AHRI certificate before advertising a system-level efficiency rating.

Installation Requirements

The MHCDLS30 is approved for compatible closet or alcove applications when assembled according to ADP instructions. The cabinet attaches above the furnace in its downflow configuration. Adequate space must be available for assembly, coil installation, filter replacement, refrigerant tubing, electrical wiring, condensate drainage, and future service.

ADP’s instructions require the installer to secure the furnace assembly appropriately to the closet or alcove framing. All structural supports, clearances, duct connections, and installation materials must comply with the manufacturer’s instructions and applicable manufactured housing codes.

Warranty and Official Documentation

Warranty coverage for this cabinet accessory must be verified using ADP’s current written terms. Do not represent the furnace or evaporator-coil warranty as automatically applying to the cabinet without confirming eligibility, installation requirements, and registration conditions.

• ADP mFurnace product information
• ADP mFurnace and coil cabinet specification guide
• ADP coil cabinet installation instructions
• ADP warranty information

Professional Installation Notice

The MHCDLS30 must be assembled and installed by a qualified HVAC professional. The installer must verify the furnace, evaporator coil, cabinet height, airflow orientation, filter, clearances, ductwork, refrigerant piping, condensate drainage, structural attachment, and applicable codes before placing the system into operation.