Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles
4” Storm Collar
$4.434 Inch Storm Collar helps protect the area where a compatible 4-inch vent pipe passes through a roof flashing. It fits around the pipe above the flashing to help direct rainwater away from the roof penetration.
- Designed for compatible 4-inch vent pipe
- Helps protect roof penetrations from rainwater
- Installs above a compatible roof flashing
- Durable metal construction
- Suitable for approved exterior vent applications
- Professional installation recommended
30″ x 6″ Braced Heater Stand
$17.18Ensure maximum stability and code compliance for your HVAC equipment with the heavy-duty 30×6 Braced Heater Stand. Featuring a reinforced design, this stand safely elevates your furnace or air handler 6 inches off the ground.
- Dimensions: 30″ Length x 6″ Height.
- Reinforced Strength: Braced construction securely supports heavier residential and light commercial units.
- Protection: Elevates equipment to prevent cabinet rust, minor water damage, and debris buildup.
- Compliance: Helps meet local safety and mechanical codes for indoor and garage installations.
12×12 Return Air Filter Grille TRU-190
$26.42The 12×12 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
Copper Insulation 1-1/8 – 1-Inch Wall x 72-Inch
$9.59Copper Insulation 1-1/8 is flexible, closed-cell elastomeric pipe insulation designed to reduce energy loss and help prevent condensation on HVAC refrigerant piping. It features a 1-1/8-inch inside diameter, 1-inch wall thickness and 72-inch length.
- 1-1/8-inch nominal inside diameter
- 1-inch insulation wall thickness
- 72-inch overall length
- Flexible closed-cell elastomeric construction
- Helps control condensation and moisture penetration
- Temperature range from -297°F to 220°F
- Black professional finish
7/8 Line Set 50ft – Refrigeration Copper Coil
$481.297/8 Line Set 50ft is an individual refrigeration copper coil measuring 7/8 inch in diameter and 50 feet long. It provides flexible tubing for compatible HVAC refrigerant-line installations. Insulation and a second copper line are not included unless separately specified.
Return Plenum 19.5×22.125
$209.73Return Plenum 19.5×22.125 provides a strong, organized connection between compatible HVAC equipment and the return-air duct system. Its four-piece construction includes L-shaped side sections and beaded panels for additional structural strength.
- Measures 19.5″ x 22.125″
- Designed for HVAC return-air applications
- Strong four-piece construction
- L-shaped side sections
- Beaded panels for added strength
- Suitable for compatible residential HVAC equipment
12×12 Register Box R6
$47.31The 12×12 Register Box R6 provides a dependable connection between compatible HVAC ductwork and a supply register or grille. Its insulated construction helps reduce heat transfer and supports efficient airflow in residential and light commercial systems.
8” Insulated Flex Duct – R6
$72.098 Inch Insulated Flex Duct R6 provides a flexible air-distribution solution for compatible residential and light commercial HVAC systems. Its reinforced inner core, R6 fiberglass insulation and durable vapor barrier support reliable supply or return airflow.
- Nominal diameter: 8 inches
- Length: 25 feet
- Insulation rating: R6
- Fiberglass thermal insulation
- Reinforced flexible inner core
- Durable exterior vapor barrier
- Suitable for compatible supply and return systems
MP-HTRS309 30×9 Heater Stand
$40.40Elevate your HVAC system safely with the heavy-duty MP-HTRS309 30×9 Heater Stand.
- Dimensions: 30″ Length x 9″ Height.
- Protection: Lifts equipment to prevent water damage and corrosion.
- Compliance: Helps meet local building codes for indoor and garage installations.
- Durability: Robust metal construction for long-lasting support.
10 Inch Insulated Flex Duct R6
$90.25The 10 Inch Insulated Flex Duct R6 is a premium solution for residential and light commercial HVAC systems. It features R6 fiberglass insulation, a reinforced inner core and a durable silver vapor barrier for reliable airflow and easier installation.
6” Insulated Flex Duct – R6
$59.51Upgrade your residential or light commercial air distribution system with our high-efficiency 6″ insulated flex duct R6. Engineered for maximum thermal retention and reliable airflow, this flexible HVAC ducting features a reinforced inner core, thick thermal fiberglass insulation, and a heavy-duty vapor barrier to prevent energy loss and condensation in challenging installation environments.
- Thermal Efficiency: Insulated with high-quality R6 fiberglass to significantly reduce heat loss and thermal transfer in unconditioned spaces like attics and crawlspaces.
- Durable Construction: Built with a reinforced flexible inner core that resists kinking and crushing, ensuring consistent airflow and system pressure.
- Moisture Protection: Features a resilient heavy-duty outer vapor barrier jacket that effectively prevents condensation buildup and protects against environmental damage.
- Flexible Installation: Designed for easy routing through tight ceiling cavities and complex framing, speeding up installation times for professional contractors.
10 Inch Hard Pipe – 60-Inch Galvanized Duct Pipe
$40.2910 Inch Hard Pipe is a 60-inch round HVAC duct manufactured from durable 30-gauge galvanized steel. Its snap-lock construction provides a rigid and reliable airflow path for compatible residential and light commercial duct installations.
16” Motorized Damper – 24V Power Open/Close
$183.1816 Inch Motorized Damper provides automatic airflow control for compatible HVAC zoning and ventilation systems. Its 24V motor powers the round damper blade in both directions, while red and green LEDs clearly indicate the fully closed or open position.
- 16-inch nominal round connection
- 24-volt motor operation
- Power-open and power-close design
- Single-leaf round damper
- Red LED indicates fully closed
- Green LED indicates fully open
- Three-wire electrical connection
24×24 Return Air Filter Grille TRU-190
$97.80The 24×24 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
10×8 Supply Grill TRU-103M
$14.95The 10×8 Supply Grill TRU-103M is a durable 3-way sidewall and ceiling register designed for reliable air distribution. It features steel construction, stamped louvers, an adjustable multi-shutter damper and a clean white powder-coated finish.
M&M 6 Inch Adjustable Elbow – 90-Degree 30GA
$6.166 Inch Adjustable Elbow by M&M is a 30-gauge round HVAC fitting designed to create directional changes up to 90 degrees. Its adjustable segmented construction supports flexible routing in compatible 6-inch duct systems.
10×10 Supply Grill TRU-104M
$18.68The 10×10 Supply Grill TRU-104M is a durable 4-way sidewall and ceiling register designed for balanced air distribution. It features stamped steel construction, an adjustable multi-shutter damper and a clean white powder-coated finish.
14×8 Supply Grill TRU-103M
$15.46The 14×8 Supply Grill TRU-103M is a durable 3-way sidewall and ceiling register designed for reliable air distribution. It features steel construction, stamped louvers, an adjustable multi-shutter damper and a clean white powder-coated finish.
9 Inch Insulated Flex Duct R6
$79.04The 9 Inch Insulated Flex Duct R6 is a premium solution for residential and light commercial HVAC systems. It features R6 fiberglass insulation, a reinforced inner core and a durable silver vapor barrier for reliable airflow and easier installation.
12 Inch Hard Pipe – 60-Inch Galvanized Duct Pipe
$37.8712 Inch Hard Pipe is a 60-inch round HVAC duct manufactured from durable 30-gauge galvanized steel. Its snap-lock construction provides a rigid and reliable airflow path for compatible residential and light commercial duct installations.
16x25x1 MERV 10 Pleated Air Filter
$10.48The 16x25x1 MERV 10 Pleated Air Filter helps reduce dust, pollen and other common airborne particles before they circulate through your HVAC system. Its pleated design provides dependable filtration for compatible residential and light commercial equipment.
3/4” Electrical Whip 6ft
$47.39Simplify your exterior electrical connections with the watertight TradePro Non-Metallic Connector Whip (3/4″ x 6′). This flexible, ready-to-use kit provides a safe and reliable power connection for HVAC units and outdoor equipment.
- Versatile Use: Ideal for AC condensers, heat pumps, hot tubs, and outdoor lighting.
- Easy Wiring: Pre-wired with three different cable colors for fast, accurate connections.
- Included Fittings: Comes with one straight connector and one removable 90° connector.
- Weatherproof: Non-metallic, watertight design protects wiring from moisture and UV rays.
16 Inch Insulated Flex Duct R6
$168.13The 16 Inch Insulated Flex Duct R6 is a premium solution for residential and light commercial HVAC systems. It features R6 fiberglass insulation, a reinforced inner core and a durable silver vapor barrier for reliable airflow and easier installation.
7” Insulated Flex Duct – R6
$66.557 Inch Insulated Flex Duct R6 provides a flexible and insulated air-distribution solution for compatible residential and light commercial HVAC systems. Its 25-foot length, reinforced inner core, fiberglass insulation and durable vapor barrier support reliable supply or return airflow.
- Nominal diameter: 7 inches
- Length: 25 feet
- Insulation rating: R6
- Fiberglass thermal insulation
- Reinforced flexible inner core
- Durable exterior vapor barrier
- Suitable for compatible supply and return systems
