M36G34AR – 1.5–3 Ton Manufactured Housing Uncased Coil

The M36G34AR is an uncased evaporator coil designed for compatible manufactured and mobile home HVAC systems. With a nominal capacity range of 18,000 to 36,000 BTU, this ADP coil can support properly matched applications ranging from 1.5 to 3 tons. It is engineered for R-454B refrigerant and includes important factory-installed components for modern A2L HVAC systems.

This indoor coil is designed to absorb heat from the air as refrigerant circulates through the aluminum slab. Its uncased configuration allows it to be installed inside an approved manufactured housing coil cabinet. Correct equipment selection, cabinet compatibility, airflow, and refrigerant matching must be confirmed before installation.

M36G34AR Features and Benefits

The M36G34AR combines an efficient aluminum coil design with features intended to support dependable cooling and simplified installation in manufactured housing applications.

• Designed for manufactured and mobile home HVAC systems
• Nominal capacity range from 18,000 to 36,000 BTU
• Supports compatible 1.5–3 ton applications
• Engineered for R-454B refrigerant
• High-efficiency lanced-fin design
• Durable aluminum slab construction
• Factory-installed non-bleed HP/AC TXV
• Includes RDS controller and refrigerant sensor
• Uncased design for installation in a compatible cabinet
• Designed to support heat pump and air-conditioning applications
• Accessible refrigerant connections for installation
• Low-water-retention drain pan design

M36G34AR Product Specifications

The M36G34AR must be matched according to the required cooling capacity and the specifications of the complete HVAC system. The final capacity and efficiency depend on the outdoor equipment, furnace, airflow settings, coil cabinet, and AHRI-certified combination.

• Manufacturer: Advanced Distributor Products
• Brand: ADP
• Model: M36G34AR
• Product type: Manufactured housing evaporator coil
• Configuration: Uncased
• Nominal capacity: 18,000–36,000 BTU
• Application range: 1.5–3 tons
• Refrigerant: R-454B
• Metering device: Non-bleed HP/AC TXV
• Refrigerant detection: RDS controller and sensor
• Coil construction: Aluminum slab
• Application: Manufactured and mobile homes
• System compatibility: Air conditioner or heat pump
• Approximate dimensions: 19 inches high × 18 inches wide × 19.5 inches deep
• Approximate weight: 28 pounds

Designed for R-454B HVAC Equipment

The M36G34AR is designed for use with compatible R-454B equipment. Because R-454B is classified as an A2L refrigerant, this model includes an RDS controller and refrigerant sensor. These components are part of the equipment’s refrigerant detection and mitigation system and must be connected according to the manufacturer’s installation instructions.

The factory-installed non-bleed thermostatic expansion valve regulates the refrigerant entering the evaporator coil. Proper refrigerant control helps the system respond to changing cooling loads and supports efficient operation when the coil is correctly matched, charged, and commissioned.

Manufactured Housing Installation

This uncased coil is intended for installation inside a compatible manufactured housing coil cabinet. The compact design helps accommodate the specialized space and airflow requirements commonly found in mobile home HVAC systems. Cabinet dimensions, drain-pan orientation, refrigerant connections, and available installation space must be checked before ordering.

The advertised capacity range does not mean the coil automatically provides every capacity between 1.5 and 3 tons. Its actual operating capacity depends on the outdoor condenser or heat pump, indoor airflow, furnace, refrigerant charge, and approved equipment match.

Compatibility and Professional Installation

Before purchasing the M36G34AR, verify the refrigerant type, required tonnage, coil cabinet, metering device, airflow requirements, furnace compatibility, and applicable AHRI combination. R-454B equipment should not be mixed with components designed exclusively for another refrigerant unless the manufacturer specifically approves the combination.

Professional installation of the M36G34AR by a licensed HVAC technician is recommended. Proper brazing, pressure testing, evacuation, condensate drainage, airflow adjustment, electrical connections, refrigerant charging, and RDS setup are essential for safe and dependable operation.

Explore more evaporator coils from Xpress Supply or review the official ADP Manufactured Home M Series.