Rheem Select 2.5 Ton Mobile Home Heat Pump System – 14.8 SEER2

Rheem Select 2.5 Ton Mobile Home Heat Pump System Overview

The Rheem Select 2.5 Ton Mobile Home Heat Pump System is a complete heating and cooling configuration for compatible manufactured homes with central ductwork. It combines a Rheem Select two-stage heat pump, an aluminum manufactured housing evaporator coil, a downflow electric furnace, and a matching coil cabinet.

This matched configuration has an AHRI-certified efficiency rating of 14.8 SEER2 under AHRI reference number 218325245. The outdoor heat pump uses R-454B refrigerant and provides approximately 30,000 BTU of nominal cooling capacity.

The system delivers both cooling and heat-pump heating through the outdoor unit. The included 10 kW electric furnace provides indoor airflow and supplemental electric resistance heat when properly configured by a qualified HVAC professional.

What’s Included

• WP14AY30AJ2NA: Rheem Endeavor Line Select Series 2.5-ton, two-stage heat pump
• M36G33AR: 3-ton manufactured housing uncased aluminum evaporator coil
• AMHE3D10B2N1: 3-ton downflow manufactured housing electric furnace with a 10 kW heat kit
• MHCDLS30: Downflow louvered coil cabinet with solid top

Each component in this Rheem Select 2.5 Ton Mobile Home Heat Pump System serves a specific function. The heat pump transfers heat for cooling and heating, the indoor coil supports refrigerant heat exchange, the electric furnace circulates conditioned air and supplies auxiliary heat, and the cabinet supports the downflow installation arrangement.

Key Features

• Nominal 2.5-ton outdoor cooling capacity
• AHRI-certified 14.8 SEER2 matched-system performance
• Two-stage heat-pump operation
• R-454B refrigerant
• 208/230V, single-phase outdoor electrical configuration
• Downflow manufactured housing application
• Five-speed ECM indoor blower motor
• 10 kW supplemental electric resistance heat
• Factory-installed circuit breaker in the electric furnace
• Aluminum indoor coil with a non-bleed heat-pump and air-conditioning TXV

Technical Specifications

Outdoor Heat Pump: WP14AY30AJ2NA

• Brand and series: Rheem Endeavor Line Select Series
• System type: Split-system heat pump
• Nominal capacity: 2.5 tons
• Nominal cooling output: 30,000 BTU
• Compressor operation: Two stage
• Refrigerant: R-454B
• Voltage: 208/230V
• Phase: Single phase
• Frequency: 60 Hz
• Minimum circuit ampacity: 20 amps
• Maximum overcurrent protection: 30 amps
• Liquid-line connection: 3/8 inch
• Suction-line connection: 3/4 inch

Manufactured Housing Coil: M36G33AR

• Nominal coil size: 3 tons
• Application: Manufactured housing
• Construction: Uncased aluminum slab coil
• Refrigerant compatibility: R-454B
• Metering device: Non-bleed heat-pump and air-conditioning TXV
• Included safety components: Refrigerant Detection System controller and sensor

Electric Furnace: AMHE3D10B2N1

• Application: Manufactured housing
• Airflow configuration: Downflow
• Nominal airflow size: 3 tons
• Blower motor: Five-speed ECM motor
• Electric heat capacity: 10 kW
• Electrical supply: 208–240V, single phase, 60 Hz
• Overcurrent protection: Circuit breaker

Coil Cabinet: MHCDLS30

• Installation configuration: Downflow
• Door: Louvered
• Top: Solid
• Cabinet height: 30.50 inches

System Compatibility

The Rheem Select 2.5 Ton Mobile Home Heat Pump System is intended for compatible manufactured housing applications that require downflow airflow. The included indoor coil and electric furnace have a nominal 3-ton airflow classification while supporting the listed 2.5-ton outdoor heat pump as part of this matched configuration.

Compatibility with existing ductwork, electrical service, line-set dimensions, thermostat controls, clearances, structural supports, and local building requirements must be confirmed before installation. The nominal tonnage alone does not determine whether this system is correctly sized for a specific home.

R-454B Refrigerant Information

The WP14AY30AJ2NA heat pump and M36G33AR coil are designed for R-454B. R-454B is classified as an A2L refrigerant and requires compatible components, installation procedures, tools, and safety practices.

The included indoor coil incorporates a Refrigerant Detection System controller and sensor. Installation and commissioning of this Rheem Select 2.5 Ton Mobile Home Heat Pump System must follow Rheem instructions, applicable codes, and current A2L refrigerant requirements.

Efficiency and System Sizing

This matched system is listed at 14.8 SEER2 under AHRI reference number 218325245. Actual energy consumption and comfort performance depend on climate, installation quality, thermostat settings, duct condition, insulation, maintenance, and the building’s heating and cooling load.

A professional Manual J load calculation should be completed before ordering the Rheem Select 2.5 Ton Mobile Home Heat Pump System. Square-footage estimates should not replace a load calculation because homes with similar floor areas can have substantially different HVAC requirements.

Warranty and Official Documentation

Manufacturer warranty coverage varies by component, application, installation, and registration status. Rheem lists conditional ten-year parts and compressor coverage for the WP14AY heat pump when applicable registration and eligibility requirements are satisfied. The indoor coil, electric furnace, and cabinet may have separate terms.

Review the documentation supplied with every component and use the official Rheem warranty and registration portal to verify eligibility, registration deadlines, exclusions, and available coverage. Warranty coverage should not be assumed until the exact equipment and installation meet Rheem’s requirements.

Professional Installation Notice

The Rheem Select 2.5 Ton Mobile Home Heat Pump System requires professional installation. A qualified HVAC technician must verify component matching, airflow, ductwork, electrical circuits, refrigerant piping, condensate drainage, controls, clearances, and compliance with applicable manufactured housing and local codes.

Improper sizing, installation, charging, or setup can reduce performance and may affect equipment safety and warranty eligibility. Xpress Supply sells HVAC equipment but does not perform the installation.

Explore additional configurations in the mobile home HVAC systems category.