Goodman 4 Ton Electric HVAC System with Heat Kit – Up to 15.2 SEER2

The Goodman 4 Ton Electric HVAC System is a complete residential straight-cool configuration designed for properties that use an air handler and electric resistance heat instead of a gas furnace. It combines a Goodman GLXS4BA4810 outdoor air conditioner, an AMST48CU1300 multiposition air handler, and a selectable Goodman electric heat kit.

This configuration provides approximately 48,000 BTU per hour of nominal cooling capacity. Correct system sizing must be determined through a professional load calculation that accounts for the property’s location, insulation, windows, construction, occupancy, and ductwork.

Goodman 4 Ton Electric HVAC System Overview

The GLXS4BA4810 is a 4-ton, single-stage split air conditioner from Goodman’s R-32 GLXS4B series. Goodman identifies this series as offering efficiency ratings of up to 15.2 SEER2. The exact certified efficiency depends on the indoor equipment combination and must be confirmed through the applicable AHRI certificate.

The outdoor air conditioner uses R-32 refrigerant and includes an energy-efficient scroll compressor, factory-installed filter drier, service valves with sweat connections, a high-pressure switch, and a fully charged refrigerant circuit designed for up to 15 feet of tubing under the manufacturer’s specified conditions.

What’s Included

The Goodman 4 Ton Electric HVAC System includes the primary heating and cooling equipment listed below.

• Goodman GLXS4BA4810 air conditioner: Four-ton outdoor condenser with approximately 48,000 BTU of nominal cooling capacity, single-stage operation, and R-32 refrigerant.
• Goodman AMST48CU1300 air handler: Four-ton multiposition indoor air handler with a direct-drive, multi-speed ECM blower motor, all-aluminum evaporator coil, and internal factory-installed thermal expansion valve.
• Selectable Goodman electric heat kit: Choose the HKTSD08X1 8 kW, HKTSD10X1 10 kW, or HKTSD15XB 15 kW electric heat kit. Each available option includes a circuit breaker.

Installation materials such as the thermostat, refrigerant line set, condenser pad, disconnect, wiring, drain components, duct transitions, and mounting accessories are not included unless specifically listed in the selected configuration.

Key Features

The Goodman 4 Ton Electric HVAC System combines the following equipment features:

• Residential straight-cool operation with supplemental electric resistance heat
• Approximately 48,000 BTU per hour of nominal cooling capacity
• Single-stage Goodman GLXS4B outdoor air conditioner
• Energy-efficient scroll compressor
• R-32 refrigerant
• Matched nominal four-ton outdoor and indoor equipment capacities
• Multiposition air handler for horizontal or vertical applications
• Direct-drive, multi-speed ECM indoor blower motor
• All-aluminum indoor evaporator coil
• Factory-installed internal thermal expansion valve
• Selectable Goodman 8 kW, 10 kW, or 15 kW electric heat kit
• Up to 15.2 SEER2, depending on the certified equipment match

Technical Specifications

Outdoor Air Conditioner

• Brand: Goodman
• Model: GLXS4BA4810
• System type: Split air conditioner
• Nominal cooling capacity: 4 tons / approximately 48,000 BTU per hour
• Compressor operation: Single stage
• Compressor type: Scroll
• Refrigerant: R-32
• Electrical requirement: 208/230 volts, single phase, 60 Hz
• Efficiency: Up to 15.2 SEER2 with an applicable certified equipment combination
• Sound level: 73 dBA according to the manufacturer’s product data
• Liquid-line size: 3/8 inch
• Recommended suction-line size: 1 1/8 inches for the standard rated line-set configuration
• Suction service-valve connection: 7/8 inch

Indoor Air Handler

• Brand: Goodman
• Model: AMST48CU1300
• Nominal capacity: 4 tons / approximately 48,000 BTU per hour
• Electrical requirement: 208/240 volts, single phase, 60 Hz
• Configuration: Multiposition
• Nominal cabinet width: 21 inches
• Cabinet depth: 21 inches
• Cabinet height: 58 inches
• Blower motor: Direct-drive, multi-speed ECM
• Evaporator coil: All-aluminum coil with internal factory-installed TXV
• Liquid-line connection: 3/8 inch
• Suction-line connection: 7/8 inch

Electric Heat Options

• HKTSD08X1: Goodman 8 kW, 208–240 volts, single phase, with circuit breaker
• HKTSD10X1: Goodman 10 kW class, 208–240 volts, single phase, with circuit breaker
• HKTSD15XB: Goodman 15 kW class, 240 volts, single phase, with circuit breaker

System Compatibility

Correct compatibility is essential when configuring the Goodman 4 Ton Electric HVAC System.

The GLXS4BA4810 outdoor air conditioner and AMST48CU1300 air handler both have a nominal cooling capacity of approximately 4 tons. Matching nominal capacities does not independently confirm the final SEER2 rating or AHRI certification.

The exact equipment combination, airflow setting, refrigerant line sizing, Goodman electric heat kit, and applicable AHRI certificate must be verified before purchase and installation. Only heat kits approved for the AMST48CU1300 air handler should be offered with this package.

The heat-kit selection must be based on the property’s heating load, climate, electrical-panel capacity, required branch circuits, and applicable electrical codes. The 15 kW option requires substantially more electrical capacity than the 8 kW or 10 kW options.

Use the AC sizing calculator as an initial reference, but do not substitute it for a professional Manual J load calculation. You can also compare this configuration with other electric HVAC systems available from Xpress Supply.

Refrigerant Information

This Goodman 4 Ton Electric HVAC System uses R-32 refrigerant. R-32 is classified as an A2L refrigerant and requires compatible equipment, tools, installation procedures, and safety practices. It must not be mixed with R-410A or used with components that are not approved for R-32 applications.

Warranty and Documentation

Eligible Goodman equipment may qualify for a 10-Year Parts Limited Warranty when properly registered online within 60 days of installation. Registration requirements, coverage periods, exclusions, and legal conditions may vary according to the equipment, application, and installation location. Review the complete manufacturer warranty before purchase and register each eligible component after installation.

Review the official Goodman GLXS4B product information, Goodman GLXS4B R-32 specification sheet, and Goodman AMST R-32 specification sheet for current manufacturer documentation.

After installation, eligible equipment can be registered through the official Goodman product registration portal.

Professional Installation Notice

Professional installation helps the Goodman 4 Ton Electric HVAC System operate according to its approved design and configuration.

The Goodman 4 Ton Electric HVAC System must be installed by a qualified HVAC professional. Installation involves A2L refrigerant handling, high-voltage electrical connections, condensate management, airflow configuration, ductwork, and commissioning. Improper selection or installation can reduce performance, affect efficiency, damage equipment, and affect warranty eligibility.