Rheem Select 3.5 Ton Electric HVAC System with Heat Kit – Up to 15.2 SEER2
From $3,735.74

The Rheem Select 3.5 Ton Electric HVAC System combines an R-454B air conditioner, multiposition air handler and 15 kW electric heat kit. This complete residential system provides powerful cooling, flexible airflow and reliable supplemental heating.
Rheem Select 3.5 Ton Electric HVAC System Overview
The Rheem Select 3.5 Ton Electric HVAC System delivers powerful residential cooling, flexible indoor airflow and dependable electric heating. This complete configuration combines a Rheem Select outdoor air conditioner, a multiposition air handler and a 15 kW electric heat kit. The system uses R-454B refrigerant and can achieve cooling efficiency ratings up to 15.2 SEER2 with an approved matched equipment combination.
With approximately 42,000 BTUs of nominal cooling capacity, this system is designed for properties that require more capacity than a standard 3-ton unit. It is a straight-cool electric configuration, meaning the outdoor condenser provides cooling while the indoor heat kit supplies electric resistance heating.
What Is Included with the Rheem Select 3.5 Ton Electric System?
The Rheem Select 3.5 Ton Electric system includes three essential HVAC components selected to work together:
- Rheem WA14AY42AJ1NA air conditioner: A 3.5-ton outdoor condenser featuring single-stage cooling, a scroll compressor and R-454B refrigerant.
- Rheem WH2TY4821STANNJ air handler: A multiposition indoor unit with a constant-torque blower motor, two-stage airflow and a thermal expansion valve.
- PROTECH RXBH-1724A15J-B heat kit: A 15 kW electric heater kit designed for 208–240 volt applications with a breaker and Smart Plug connection.
Final performance depends on the complete matched equipment combination, proper airflow settings and professional installation. The selected models and electrical requirements should be confirmed before ordering.
Key Benefits of This 3.5 Ton Electric HVAC System
The Rheem Select 3.5 Ton Electric HVAC System provides a complete replacement option for residential properties that use electric heat instead of a gas furnace. The multiposition air handler can support horizontal, upflow and downflow configurations, making the system adaptable to different installation spaces.
- Nominal 3.5-ton or 42,000 BTU cooling capacity
- Cooling efficiency ratings up to 15.2 SEER2
- Lower-GWP R-454B refrigerant
- Single-stage scroll compressor
- Multiposition indoor air handler
- Constant-torque blower motor
- Two-stage indoor airflow capability
- 15 kW supplemental electric heating
- Matched Rheem and PROTECH components
Dependable Cooling Performance
The condenser included with the Rheem Select 3.5 Ton Electric system belongs to Rheem’s Endeavor Line Select Series. Its single-stage scroll compressor delivers consistent cooling during warm weather, while the fully louvered steel cabinet helps protect the outdoor coil from weather, debris and common yard hazards.
Rheem’s optimized 7 mm coil design supports efficient airflow and heat transfer. The outdoor unit also provides accessible service areas that can simplify installation and future maintenance for qualified HVAC technicians.
Review detailed condenser specifications on the official Rheem product page.
Flexible Indoor Airflow and Electric Heat
The WH2TY air handler features a constant-torque motor designed to maintain dependable airflow through the home’s ductwork. Its multiposition cabinet supports horizontal, upflow and downflow applications, providing flexibility when replacing existing indoor equipment.
The included 15 kW heat kit provides supplemental electric heating without requiring a gas furnace. During heating operation, electric resistance elements warm the air before the blower distributes it throughout the property.
Because a 15 kW heater requires significant electrical capacity, a qualified professional must confirm the electrical panel, wiring, breaker size and local code requirements before installation.
Is a 3.5 Ton System the Correct Size?
The Rheem Select 3.5 Ton Electric HVAC System should only be selected after the property’s cooling load has been evaluated. Square footage is useful for an initial estimate, but insulation, ceiling height, windows, climate, sun exposure, duct design and occupancy can substantially affect the required capacity.
An oversized unit may cycle too frequently and provide poor humidity control. An undersized unit may run continuously during hot weather without maintaining the desired indoor temperature. Use the Xpress AC Sizing Calculator as a starting point and request a professional load calculation before purchasing.
Professional Installation Required
The Rheem Select 3.5 Ton Electric system must be installed by a qualified HVAC professional trained to work with R-454B equipment and applicable A2L refrigerant procedures. The installer must verify refrigerant piping, electrical service, airflow, duct capacity, condensate drainage and local building requirements.
Additional materials may include a compatible thermostat, refrigerant line set, condenser pad, disconnect, drain pan, electrical wiring and installation accessories. These items are not included unless specifically identified in the selected package.
Warranty and Documentation
Eligible Rheem equipment may qualify for a 10-Year Conditional Parts Limited Warranty when registered online within 90 days of installation. Without registration, the base limited warranty is 5 years. Coverage periods, exclusions, and legal conditions may vary according to the equipment, application, and installation location. Review the complete manufacturer warranty before purchase and register each eligible component after installation.
Coverage terms for the WA14AY42AJ1NA air conditioner and WH2TY4821STANNJ air handler included in this system are detailed in the official Rheem residential split limited warranty. Model details are available on the official Rheem WA14AY42AJ1NA product page.
After installation, eligible equipment can be registered through the official Rheem warranty and registration portal.
Why Purchase This Rheem Select System from Xpress Supply?
Purchasing the Rheem Select 3.5 Ton Electric HVAC System from Xpress Supply gives you access to genuine equipment, competitive pricing and assistance verifying component compatibility. Our HVAC product team can help confirm the selected models and identify additional supplies required for installation.
Browse our complete selection of electric HVAC systems or contact Xpress Supply for help choosing the correct equipment.
| Application | Residential |
|---|---|
| Configuration Airflow | Horizontal, Upflow, Upflow/Downflow |
| Cooling Capacity | 3.5 Tons |
| System Type | Electric, Straight Cool |
| Stage | Single Stage |
| Refrigerant | R-454B |
| Efficiency | 15.2 SEER2 |
| Home Size | 1,200 – 1,800 sq ft |
| Model # | RXBH-1724A15J-B, WA14AY42AJ1NA, WH2TY4821STANNJ |
Only logged in customers who have purchased this product may leave a review.

About Rheem
Founded in 1925, Rheem has more than a century of experience developing dependable heating, cooling, and water heating solutions. Rheem HVAC equipment combines proven engineering, energy-efficient performance, and advanced comfort technology for residential and light commercial applications.Why Choose Rheem?
- Air conditioners, heat pumps, furnaces, air handlers, coils, and complete HVAC systems
- High-efficiency options designed to reduce energy consumption
- Durable components and factory-tested performance
- EcoNet® smart monitoring compatibility on select systems
- Solutions for residential and light commercial applications

Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles







Reviews
There are no reviews yet