Return Plenum 16×19.75×48
$218.78Return Plenum 16×19.75×48 provides a strong and organized return-air connection for compatible residential HVAC equipment. Its four-piece construction uses two L-shaped side sections and beaded panels for additional structural strength.
- Measures 16 x 19.75 x 48 inches
- Designed for HVAC return-air applications
- Four-piece assembly
- Two L-shaped side sections
- Beaded for additional strength
- Suitable for compatible residential equipment
Rheem Select 2 Ton Gas Split System – 80% AFUE – Upflow/Horizontal
From $3,655.48The Rheem Select 2 Ton Gas Split System combines a WA14AY24BJ1NA R-454B outdoor air conditioner, TCFY2414STAAMC cased evaporator coil, and W801T0503A14UHSNAS 80% AFUE upflow/horizontal gas furnace. This residential straight-cool system provides approximately 24,000 BTU of nominal cooling capacity with single-stage operation. Professional sizing and installation are required.
M48E36AR – 4 Ton Manufactured Housing Uncased Coil / Mobile Home
$1,321.73The M48E36AR 4 Ton manufactured housing evaporator coil features an uncased design, copper slab, R-454B non-bleed heat pump and air-conditioning TXV, and factory-installed refrigerant detection system controller and sensor. Its 18-inch drain pan width and 23-inch coil height support compatible mobile home furnace applications. Exact outdoor equipment matching must be verified before purchase.
RXBH-24A20J-B – Rheem 20 kW Electric Heat Kit with Smart Plug
$403.99RXBH-24A20J-B is a Rheem 20 kW electric heat kit designed for installation in compatible Rheem and Ruud air handlers. It features Rheem’s Smart Plug connection and operates on 208–240V, single-phase, 60 Hz electrical power.
- Heating capacity: 20 kW
- Approximate output: Up to 68,240 BTU/h
- Voltage: 208–240V
- Phase: Single phase
- Frequency: 60 Hz
- Connection: Rheem Smart Plug
- Application: Compatible Rheem and Ruud air handlers
- Installation: Professional installation required
10x6x6 Register Box R6
$22.42The 10x6x6 Register Box R6 connects compatible HVAC ductwork to a supply register or grille. Its insulated construction helps reduce heat transfer and supports dependable airflow in residential and light commercial systems.
507DR812 – 12” Start Collar w/ Damper
$20.97507DR812 12 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 12-inch round HVAC ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR812
- Nominal diameter: 12 inches
- Designed for 1½″ or 2″ ductboard
- Galvanized steel construction
- Integrated airflow damper
- Professional installation recommended
507DR810 – 10” Start Collar w/ Damper
$19.75507DR810 10 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC mounting surface and 10-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR810
- Nominal diameter: 10 inches
- Designed for compatible 1″ or 1½″ mounting material
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
14 Inch Insulated Flex Duct R6
$133.76The 14 Inch Insulated Flex Duct R6 is a premium solution for residential and light commercial HVAC systems. It features R6 fiberglass insulation, a reinforced inner core and a durable silver vapor barrier for reliable airflow and easier installation.
16” Insulated Flex Duct – R8
$234.5216 Inch Insulated Flex Duct R8 is a 25-foot flexible air duct designed for residential and light commercial HVAC systems. It features R8 fiberglass insulation, a reinforced flexible inner core, and a durable silver vapor barrier for compatible supply and return-air applications.
- Nominal diameter: 16 inches
- Overall length: 25 feet
- Insulation rating: R8
- Fiberglass insulation
- Reinforced flexible inner core
- Heavy-duty silver vapor barrier
- Suitable for supply and return-air systems
8” Insulated Flex Duct – R6
$72.098 Inch Insulated Flex Duct R6 provides a flexible air-distribution solution for compatible residential and light commercial HVAC systems. Its reinforced inner core, R6 fiberglass insulation and durable vapor barrier support reliable supply or return airflow.
- Nominal diameter: 8 inches
- Length: 25 feet
- Insulation rating: R6
- Fiberglass thermal insulation
- Reinforced flexible inner core
- Durable exterior vapor barrier
- Suitable for compatible supply and return systems
Rheem Select 4 Ton Heat Pump System – Multiposition – 14.3 SEER2
From $5,293.11The Rheem Select 4 Ton Heat Pump System combines a two-stage WP14AY48AJ2NA R-454B heat pump, WH2TY4821STANNJ multiposition air handler, and RXBH-1724A15J-B 15 kW-class electric heat kit. This AHRI-certified residential combination delivers electric cooling and heating with flexible upflow, downflow, horizontal-left, or horizontal-right installation.
M30G31AR – 2 1/2 Ton Manufactured Housing Uncased Coil / Mobile Home
$1,378.89The M30G31AR Mobile Home Uncased Coil is a 2 1/2 ton HVAC component designed for compatible manufactured housing and mobile home applications. Verify system compatibility and installation requirements before ordering.
Goodman 3.5 Ton Air Handler
$1,514.63The Goodman 3.5 Ton Air Handler, model AMST42CU1300, features a multi-position design, factory-installed R-32 TXV, AlumaFin7™ evaporator coil, leak detection sensor, and 9-speed ECM blower motor.
Designed for compatible residential cooling and heat pump systems. Professional installation and equipment matching are required.
Goodman 4 Ton Horizontal Evaporator Coil
$848.41The Goodman CHPTA4830C3 Evaporator Coil is a 4 ton horizontal cased coil for compatible R-32 systems. It features all-aluminum construction, a factory-installed TXV, an R-32 sensor, and a durable thermoplastic drain pan.
MRCOOL EasyPro 12K Mini Split System – 5th Generation – 115V
$1,785.04The MRCOOL EasyPro 12K Mini Split System (115V) is a complete single-zone ductless heat pump with an R-454B outdoor condenser, wall-mounted indoor air handler, and a 16 ft pre-charged Easy Connection line set. This 115V inverter system delivers 12,000 BTU of cooling, 12,000 BTU of heating, 19.5 SEER2 efficiency, and smart Wi-Fi control.
5” Insulated Flex Duct – R6
$53.645 Inch Insulated Flex Duct R6 provides a flexible and insulated air-distribution solution for compatible residential and light commercial HVAC systems. Its 25-foot length, reinforced inner core, fiberglass insulation and exterior vapor barrier support dependable supply or return airflow.
- Nominal diameter: 5 inches
- Length: 25 feet
- Insulation rating: R6
- Fiberglass thermal insulation
- Reinforced flexible inner core
- Durable exterior vapor barrier
- Suitable for compatible supply and return systems
Rheem Select 75,000 BTU 80% AFUE Gas Furnace
$1,286.65W801T0754A17UHSNAS is a Rheem Select 75,000 BTU gas furnace designed for upflow or horizontal residential installation. It features 80% AFUE, single-stage heating, direct spark ignition and a five-speed constant-torque ECM blower.
- 75,000 BTU heating input
- Approximately 60,000 BTU heating output
- 80% AFUE efficiency
- Single-stage gas heating
- Five-speed constant-torque ECM blower
- Upflow or horizontal configuration
- 17.5-inch cabinet width
HKTSD15XB – Goodman 15 kW Electric Heat Kit with Circuit Breaker
$265.97HKTSD15XB is a Goodman 15 kW electric heat kit designed for compatible Goodman air handlers. It provides approximately 51,180 BTU/h at 240V and includes circuit-breaker protection for a convenient HVAC heating solution.
- Heating capacity: 15 kW
- Approximate output: Up to 51,180 BTU/h
- Voltage: 240V
- Phase: Single phase
- Protection: Circuit breaker
- Application: Residential HVAC systems
- Dimensions: 23 × 12 × 6 inches
- Weight: 10 lb
Rheem Select 2.5 Ton Electric HVAC System with Heat Kit – Up to 15.2 SEER2
From $3,272.43The Rheem Select 2.5 Ton Electric HVAC System combines an R-454B air conditioner, multiposition air handler and PROTECH 10 kW electric heat kit. This complete residential straight-cool system provides reliable cooling, flexible airflow and dependable supplemental heating.
MRCOOL DIY Select 12K Mini Split System – 115V
$1,514.42The MRCOOL DIY Select 12K Mini Split System (115V) is a complete single-zone ductless heat pump with an R-454B outdoor condenser, wall-mounted indoor air handler, and a 11.5 ft pre-charged Quick Connect® line set. This 115V inverter system delivers 12,000 BTU of cooling, 12,000 BTU of heating, 17.5 SEER2 efficiency, and smart Wi-Fi control.
Rheem Select 1.5 Ton 14.3 SEER2 Air Conditioner Condenser
$1,774.69The WA14AY18AJ1NA is a Rheem Select 1.5 ton air conditioner condenser designed for compatible R-454B systems. It features 14.3 SEER2 efficiency, single-stage cooling, a scroll compressor, and durable outdoor construction.
10×8 Supply Grill TRU-103M
$14.95The 10×8 Supply Grill TRU-103M is a durable 3-way sidewall and ceiling register designed for reliable air distribution. It features steel construction, stamped louvers, an adjustable multi-shutter damper and a clean white powder-coated finish.
MHCDLS40 – mFurnace™ Coil Cabinet, Downflow, Louvered Door, Solid Top, 40.25″ Height
$250.06The MHCDLS40 mFurnace Coil Cabinet is a downflow manufactured housing accessory designed to mount above a compatible electric furnace and house an approved ADP M Series evaporator coil. It features a louvered front door, solid top, 40.25-inch height, maximum rated airflow of 1,800 CFM, and space for two 20 × 20 × 1-inch pleated air filters.
Rheem Select 3 Ton Mobile Home Straight Cool Complete HVAC System 15.2 SEER2
From $4,977.77The Rheem Select 3 Ton Mobile Home AC System combines an R-454B outdoor air conditioner, manufactured housing evaporator coil, downflow electric furnace, and louvered coil cabinet. AHRI reference 218114117 certifies this combination at 34,000 BTU/h, 15.2 SEER2, and 12.0 EER2. It provides straight-cool operation with 10 kW electric resistance heating.

Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles








