Rheem Select 5 Ton 13.8 SEER2 Air Conditioner Condenser

The WA14AY60AJ1NA is a Rheem Select 5 ton air conditioner condenser engineered for dependable residential cooling. This outdoor unit uses R-454B refrigerant and delivers a nominal cooling capacity of 60,000 BTU. Its single-stage operation provides straightforward performance for properly sized and professionally matched HVAC systems.

Part of the Rheem Endeavor Line Select Series, this condenser combines a durable outdoor cabinet with an optimized coil design and accessible service components. It is intended for straight-cool air-conditioning applications and must be paired with a compatible indoor evaporator coil or air handler.

WA14AY60AJ1NA Features and Benefits

The WA14AY60AJ1NA includes features designed to support reliable cooling, efficient heat transfer, equipment protection, and convenient professional service.

• Nominal 5 ton cooling capacity
• Approximately 60,000 BTU per hour
• 13.8/14.3 SEER2 efficiency based on the matched system
• Designed for R-454B refrigerant
• Reliable single-stage cooling operation
• Durable scroll compressor
• Optimized 7 mm condenser coil design
• Fully louvered steel cabinet
• Accessible control box for installation and service
• Expanded service-valve working area
• Integrated refrigerant detection technology
• Compatible with standard 24-volt thermostats
• Designed for residential straight-cool systems

WA14AY60AJ1NA Product Specifications

The WA14AY60AJ1NA must be combined with approved indoor equipment to achieve its published capacity and SEER2 rating. Actual system performance depends on the evaporator coil or air handler, furnace, blower airflow, ductwork, installation conditions, and applicable AHRI combination.

• Manufacturer: Rheem
• Series: Endeavor Line Select
• Model: WA14AY60AJ1NA
• Equipment type: Air conditioner condenser
• System type: Straight cool
• Nominal capacity: 5 tons
• Nominal cooling capacity: 60,000 BTU
• Efficiency: 13.8/14.3 SEER2 depending on equipment match
• Refrigerant: R-454B
• Compressor: Single-stage scroll compressor
• Voltage: 208/230 volts
• Phase: Single phase
• Frequency: 60 Hz
• Maximum overcurrent protection: 50 amps
• Liquid-line connection: 3/8 inch
• Suction-line connection: 7/8 inch
• Sound rating: Approximately 76 dB
• Dimensions: Approximately 45.17 inches high × 35.43 inches wide × 35.43 inches deep
• Operating weight: Approximately 266 pounds

Efficient Single-Stage Cooling

This Rheem Select condenser uses a single-stage compressor that operates at full capacity whenever cooling is required. The straightforward design makes it a dependable option for residential properties that need consistent cooling from a properly sized 5 ton system.

The published 13.8 or 14.3 SEER2 rating depends on the region and complete matched system. The condenser alone does not determine final efficiency. The indoor coil, blower motor, furnace or air handler, refrigerant charge, and airflow settings all influence the certified system rating.

R-454B Refrigerant Technology

The WA14AY60AJ1NA is specifically designed for R-454B refrigerant. It should only be connected to indoor equipment approved for the same refrigerant and equipped with the required detection and mitigation components.

R-454B is classified as an A2L refrigerant. Installation, charging, service, refrigerant-line preparation, and system commissioning must follow applicable codes and Rheem instructions. Components intended exclusively for R-410A or R-32 should not be used unless the manufacturer expressly approves the combination.

Durable Outdoor Construction

A fully louvered steel cabinet helps protect the condenser coil from weather and common yard hazards. The optimized 7 mm coil promotes airflow and heat transfer, while the accessible control compartment helps qualified technicians perform electrical connections, inspections, and routine service.

The outdoor unit should be installed on a stable and level condenser pad with the required clearance around every side. Adequate space is essential for proper airflow, heat rejection, service access, and long-term equipment operation.

Compatibility and Professional Installation

Before ordering the WA14AY60AJ1NA, verify the required cooling load, electrical service, indoor equipment, refrigerant type, line-set dimensions, airflow, thermostat, and AHRI-certified combination. Tonnage should be selected through a professional load calculation rather than property size alone.

Professional installation of the WA14AY60AJ1NA by a qualified HVAC technician is required. Correct brazing, nitrogen purging, evacuation, electrical protection, refrigerant charging, airflow adjustment, and system testing are essential for safe and dependable performance.

Explore more air conditioner condensers from Xpress Supply or review the official Rheem WA14AY60AJ1NA specifications.