M60G52AR – 5 Ton Manufactured Housing Uncased Coil / Mobile Home

The M60G52AR is a 5 ton manufactured housing evaporator coil from the ADP M Series. This uncased indoor coil is designed for installation with compatible mobile home furnaces, air conditioners, and heat pump systems. Its model designation identifies a nominal 60,000 BTU capacity, aluminum slab, R-454B non-bleed heat pump and air-conditioning TXV, and factory-installed refrigerant detection system controller and sensor.

This product is an evaporator coil only. It does not include an outdoor condenser, heat pump, furnace, blower, line set, thermostat, or installation materials unless those items are separately stated in the product configuration.

M60G52AR Product Overview

The M60G52AR uses ADP’s M Series manufactured housing design. The uncased configuration allows the coil to be integrated with a compatible mobile home furnace and coil cabinet while maintaining the required airflow and condensate drainage arrangement.

ADP identifies the G52 slab as an aluminum coil suitable for nominal 4 to 5 ton configurations. The M60 model designation establishes this particular coil’s nominal capacity as 60,000 BTU, or 5 tons. Actual cooling efficiency and delivered capacity depend on the outdoor unit, furnace or blower, airflow, installation conditions, and certified equipment combination.

What’s Included

• M60G52AR manufactured housing uncased evaporator coil
• Factory-installed R-454B non-bleed heat pump and air-conditioning TXV
• Factory-installed refrigerant detection system controller and sensor
• Low-retention condensate drain pan with downflow drip shields
• Factory-supplied coil accessories and installation documentation

Review the shipment and official installation instructions before installation. Required field materials, refrigerant piping, electrical components, furnace cabinet, and outdoor equipment are normally supplied separately.

Key Features

• Manufactured housing application: Designed specifically for use with compatible mobile home HVAC equipment.
• Uncased construction: Intended for integration with an approved furnace and coil cabinet configuration.
• Aluminum slab: The letter G in the model number identifies aluminum coil construction.
• R-454B metering device: The letter A identifies a non-bleed heat pump and air-conditioning TXV configured for R-454B.
• Factory-installed RDS: The letter R confirms that the refrigerant detection system controller and sensor are factory installed.
• Installation-focused design: Includes downturned headers, threaded expansion-valve connections, and downflow condensate-control features.
• Factory testing: ADP states that its M Series coils are pressure and leak tested before shipment.

M60G52AR Technical Specifications

• Manufacturer: Advanced Distributor Products (ADP)
• Series: M Series
• Model: M60G52AR
• Equipment type: Manufactured housing uncased evaporator coil
• Nominal capacity: 5 tons / 60,000 BTU
• Coil material: Aluminum
• Slab number: G52
• Refrigerant configuration: R-454B
• Metering device: Non-bleed heat pump and air-conditioning TXV
• Refrigerant detection system: Factory-installed controller and sensor
• Application: Compatible manufactured housing HVAC systems
• Pan width: 18 inches
• Pan depth: 19.5 inches
• Coil height: 31 inches
• Published aluminum coil weight: 50 pounds
• Liquid-line connection: 3/8-inch ODF
• Suction-line connection: 7/8-inch ODF

System Compatibility

The M60G52AR is designed for pull-through operation with compatible manufactured housing equipment. ADP describes M Series coils for use with many mobile home electric furnaces in downflow or upflow configurations and mobile home gas furnaces in downflow configurations.

Compatibility must be verified using the exact outdoor-unit, furnace, blower, coil-cabinet, and refrigerant requirements. Do not select this coil based only on its nominal tonnage. The installing contractor must confirm airflow, physical clearances, refrigerant-line sizes, condensate drainage, metering device, and system certification.

Browse compatible mobile home HVAC systems or view additional evaporator coils.

R-454B Refrigerant Information

The M60G52AR is configured with an R-454B non-bleed TXV and a factory-installed refrigerant detection system controller and sensor. R-454B is classified as an A2L refrigerant and requires approved tools, procedures, components, ventilation practices, and appropriately trained personnel.

The coil is only one component of the refrigerant circuit. The complete system must use compatible R-454B equipment. The refrigerant detection system must be installed, connected, tested, and maintained according to ADP’s instructions and applicable codes.

Efficiency and Certified Matching

The M60G52AR does not have an independent SEER2, EER2, or HSPF2 rating. Efficiency ratings apply to complete matched systems and can change according to the outdoor unit, indoor blower or furnace, coil, and installation configuration. Consult the applicable AHRI certificate before advertising a system-level efficiency rating.

Warranty and Documentation

ADP lists a standard five-year limited parts warranty for qualifying evaporator coils and an available ten-year extended limited warranty when registration and all eligibility requirements are satisfied. Registration is generally required within 90 days of installation, subject to the official warranty terms and jurisdiction-specific protections. Review the current warranty documents before representing coverage for this product. :contentReference[oaicite:1]{index=1}

• ADP M Series product information
• ADP M Series A2L specification guide
• ADP warranty information and registration

Professional Installation Notice

The M60G52AR must be installed by a qualified HVAC professional familiar with manufactured housing systems and A2L refrigerants. The installer must verify the complete equipment match, required airflow, refrigerant charge, leak-detection operation, electrical connections, condensate drainage, and compliance with manufacturer instructions and applicable codes.