Rheem Select 5 Ton Mobile Home Straight Cool System – 14.5 SEER2

Rheem Select 5 Ton Mobile Home Straight Cool System Overview

The Rheem Select 5 Ton Mobile Home Straight Cool System is a complete cooling and electric heating configuration designed for compatible manufactured homes with central ductwork. It combines a Rheem Select single-stage outdoor air conditioner, an aluminum manufactured housing evaporator coil, a downflow electric furnace, and a matching louvered coil cabinet.

The outdoor air conditioner provides 60,000 BTU of nominal cooling capacity and uses R-454B refrigerant. The included electric furnace circulates conditioned air through the home and supplies 15 kW of electric resistance heat when properly installed and configured.

This is a straight-cool system. The outdoor unit provides air conditioning only and does not reverse operation to provide heat. Heating is supplied through the included electric furnace.

What’s Included

• WA14AY60AJ1NA: Rheem Endeavor Line Select Series 5-ton single-stage air conditioner
• M60G52AR: 5-ton manufactured housing uncased aluminum evaporator coil
• AMHE5D15B2N1: 5-ton downflow manufactured housing electric furnace with 15 kW electric heat
• MHCDLS40: Downflow louvered coil cabinet with solid top

Each component of the Rheem Select 5 Ton Mobile Home Straight Cool System performs a specific function. The outdoor air conditioner rejects heat from the home, the evaporator coil absorbs indoor heat, the electric furnace circulates conditioned air and supplies resistance heat, and the cabinet supports the downflow manufactured housing installation.

Key Features

• Nominal 5-ton outdoor cooling capacity
• Single-stage scroll compressor
• R-454B refrigerant
• 208/230V, single-phase outdoor electrical configuration
• Downflow manufactured housing application
• Five-speed ECM indoor blower motor
• 15 kW electric resistance heat
• Factory-installed circuit breaker in the electric furnace
• Aluminum indoor evaporator coil
• Non-bleed heat-pump and air-conditioning TXV
• Refrigerant Detection System controller and sensor

Technical Specifications

Outdoor Air Conditioner: WA14AY60AJ1NA

• Brand and series: Rheem Endeavor Line Select Series
• System type: Split-system air conditioner
• Nominal capacity: 5 tons
• Nominal cooling capacity: 60,000 BTU
• Compressor: Single-stage scroll compressor
• Refrigerant: R-454B
• Voltage: 208/230V
• Phase: Single phase
• Frequency: 60 Hz
• Minimum circuit ampacity: 31 amps
• Maximum overcurrent protection: 50 amps
• Factory refrigerant charge: 192 ounces
• Liquid-line connection: 3/8 inch
• Suction-line connection: 7/8 inch
• Sound level: Approximately 76 dB
• Outdoor unit dimensions: Approximately 45.17 inches high, 35.44 inches wide, and 35.44 inches deep
• Unit weight: Approximately 266 pounds

Manufactured Housing Coil: M60G52AR

• Nominal coil capacity: 5 tons
• Application: Manufactured housing
• Configuration: Uncased evaporator coil
• Coil construction: Aluminum slab
• Refrigerant compatibility: R-454B
• Metering device: Non-bleed heat-pump and air-conditioning TXV
• Safety components: Refrigerant Detection System controller and sensor

Electric Furnace: AMHE5D15B2N1

• Application: Manufactured housing
• Airflow configuration: Downflow
• Nominal airflow size: 5 tons
• Blower motor: Five-speed ECM motor
• Electric heat capacity: 15 kW
• Electrical supply: 208–240V, single phase, 60 Hz
• Overcurrent protection: Circuit breaker

Coil Cabinet: MHCDLS40

• Installation configuration: Downflow
• Door: Louvered
• Top: Solid
• Cabinet height: 40.25 inches

System Compatibility

The Rheem Select 5 Ton Mobile Home Straight Cool System is intended for compatible manufactured housing installations requiring downflow airflow. The outdoor air conditioner, indoor coil, and electric furnace are all nominally classified for 5-ton applications.

The outdoor unit is an air conditioner, not a heat pump. It should not be represented as providing compressor-based heating. Winter heating is supplied by the included electric resistance furnace.

Before ordering, a qualified HVAC professional must verify the home’s cooling load, ductwork, electrical capacity, refrigerant piping, thermostat controls, condensate drainage, installation clearances, structural supports, and applicable manufactured housing requirements.

R-454B Refrigerant Information

The WA14AY60AJ1NA air conditioner and M60G52AR indoor coil are designed for R-454B refrigerant. R-454B is classified as an A2L refrigerant and requires compatible equipment, tools, procedures, and safety practices.

The indoor coil includes a Refrigerant Detection System controller and sensor. Installation and commissioning of the Rheem Select 5 Ton Mobile Home Straight Cool System must follow Rheem instructions, applicable codes, and current A2L refrigerant requirements.

Efficiency and System Sizing

The complete system is currently offered as a 14.5 SEER2 configuration. The exact certified efficiency applies only to the specific combination of outdoor unit, indoor coil, furnace, metering device, and airflow settings listed in a valid AHRI certificate.

Actual comfort and energy consumption depend on climate, installation quality, thermostat settings, insulation, duct condition, maintenance, and the building’s cooling load.

A professional Manual J load calculation should be completed before purchasing the Rheem Select 5 Ton Mobile Home Straight Cool System. Square footage alone cannot determine the correct equipment size because manufactured homes of similar size may have different insulation, windows, occupancy, ductwork, orientation, and climate conditions.

Warranty and Official Documentation

Manufacturer warranty coverage varies according to component, application, registration status, and installation conditions. Rheem lists five-year limited parts coverage and conditional ten-year compressor coverage for the WA14AY air conditioner when applicable registration and eligibility requirements are satisfied. Separate terms may apply to the indoor coil, furnace, and cabinet.

Review the documentation supplied with every component and visit the official Rheem warranty and registration portal to confirm registration deadlines, exclusions, eligibility, and available coverage.

Professional Installation Notice

The Rheem Select 5 Ton Mobile Home Straight Cool System requires professional installation. A qualified HVAC technician must confirm equipment matching, system sizing, airflow, electrical circuits, refrigerant piping, controls, clearances, condensate drainage, and compliance with local and manufactured housing codes.

Improper sizing, refrigerant charging, wiring, airflow setup, or installation can reduce performance and may affect equipment safety and warranty eligibility. Xpress Supply sells HVAC equipment but does not perform installation services.

Explore additional configurations in the mobile home straight-cool systems category.