Rheem Select 4 Ton Mobile Home Straight Cool System – 15.2 SEER2

Rheem Select 4 Ton Mobile Home Straight Cool System Overview

The Rheem Select 4 Ton Mobile Home Straight Cool System is a complete cooling and electric heating configuration designed for compatible manufactured homes with central ductwork. It combines a Rheem Select single-stage outdoor air conditioner, a manufactured housing evaporator coil, a downflow electric furnace, and a matching louvered coil cabinet.

This factory-matched configuration is certified at 15.2 SEER2 and 11.0 EER2 under AHRI reference number 218113133. The certified combination provides 43,000 BTU of cooling capacity at the AHRI AFull test condition.

This is a straight-cool system, meaning the outdoor unit provides air conditioning only and does not operate as a heat pump. Heating is supplied through the included 15 kW electric furnace when properly installed and configured by a qualified HVAC professional.

What’s Included

• WA14AY48AJ1NA: Rheem Endeavor Line Select Series 4-ton single-stage air conditioner
• M48E36AR: 4-ton manufactured housing uncased evaporator coil
• AMHE5D15B2N1: 5-ton downflow manufactured housing electric furnace with 15 kW electric heat
• MHCDLS30: Downflow louvered coil cabinet with solid top

Each component of the Rheem Select 4 Ton Mobile Home Straight Cool System performs a specific function. The outdoor air conditioner rejects heat from the home, the evaporator coil absorbs indoor heat, the electric furnace circulates conditioned air and supplies resistance heat, and the cabinet supports the downflow manufactured housing installation.

Key Features

• Nominal 4-ton outdoor cooling capacity
• AHRI-certified 15.2 SEER2 and 11.0 EER2 performance
• 43,000 BTU certified cooling capacity at the AHRI AFull condition
• Single-stage scroll compressor
• R-454B refrigerant
• 208/230V, single-phase outdoor electrical configuration
• Downflow manufactured housing application
• Five-speed ECM indoor blower motor
• 15 kW electric resistance heat
• Factory-installed circuit breaker in the electric furnace
• Copper-slab indoor evaporator coil
• Non-bleed heat-pump and air-conditioning TXV
• Refrigerant Detection System controller and sensor

Technical Specifications

Outdoor Air Conditioner: WA14AY48AJ1NA

• Brand and series: Rheem Endeavor Line Select Series
• System type: Split-system air conditioner
• Nominal capacity: 4 tons
• Nominal outdoor-unit capacity: 48,000 BTU
• Compressor: Single-stage scroll compressor
• Refrigerant: R-454B
• Voltage: 208/230V
• Phase: Single phase
• Frequency: 60 Hz
• Minimum circuit ampacity: 30 amps
• Maximum overcurrent protection: 50 amps
• Factory refrigerant charge: 142 ounces
• Liquid-line connection: 3/8 inch
• Suction-line connection: 7/8 inch
• Sound level: Approximately 74 dB
• Outdoor unit dimensions: Approximately 35.17 inches high, 33.66 inches wide, and 33.66 inches deep
• Unit weight: Approximately 243 pounds

Manufactured Housing Coil: M48E36AR

• Nominal coil capacity: 4 tons
• Application: Manufactured housing
• Configuration: Uncased evaporator coil
• Coil construction: Copper slab
• Refrigerant compatibility: R-454B
• Metering device: Non-bleed heat-pump and air-conditioning TXV
• Safety components: Refrigerant Detection System controller and sensor

Electric Furnace: AMHE5D15B2N1

• Application: Manufactured housing
• Airflow configuration: Downflow
• Nominal airflow size: 5 tons
• Blower motor: Five-speed ECM motor
• Electric heat capacity: 15 kW
• Electrical supply: 208–240V, single phase, 60 Hz
• Overcurrent protection: Circuit breaker

Coil Cabinet: MHCDLS30

• Installation configuration: Downflow
• Door: Louvered
• Top: Solid
• Cabinet height: 30.50 inches

System Compatibility

The Rheem Select 4 Ton Mobile Home Straight Cool System is intended for compatible manufactured housing installations requiring downflow airflow. The 5-ton designation of the electric furnace represents its available airflow range and does not change the system’s nominal 4-ton cooling classification.

The outdoor unit in this system is an air conditioner, not a heat pump. It should not be represented as providing compressor-based heating. Winter heating is supplied by the included electric resistance furnace.

Before ordering, a qualified HVAC professional must verify the home’s cooling load, ductwork, electrical capacity, refrigerant piping, thermostat controls, condensate drainage, installation clearances, structural supports, and applicable manufactured housing requirements.

R-454B Refrigerant Information

The WA14AY48AJ1NA air conditioner and M48E36AR indoor coil are designed for R-454B refrigerant. R-454B is classified as an A2L refrigerant and requires compatible equipment, tools, procedures, and safety practices.

The indoor coil includes a Refrigerant Detection System controller and sensor. Installation and commissioning of the Rheem Select 4 Ton Mobile Home Straight Cool System must follow Rheem instructions, applicable codes, and current A2L refrigerant requirements.

Certified Efficiency and System Sizing

This matched combination is certified at 15.2 SEER2 and 11.0 EER2 under AHRI reference number 218113133. These ratings apply to the complete listed combination and should not be replaced by the standalone efficiency value associated with the outdoor unit.

Actual comfort and energy consumption depend on climate, installation quality, thermostat settings, insulation, duct condition, maintenance, and the building’s cooling load.

A professional Manual J load calculation should be completed before purchasing the Rheem Select 4 Ton Mobile Home Straight Cool System. Square footage alone cannot determine the appropriate equipment capacity because manufactured homes of similar size may have different insulation, windows, occupancy, ductwork, orientation, and climate conditions.

Warranty and Official Documentation

Manufacturer warranty coverage varies according to component, application, registration status, and installation conditions. Rheem lists five-year limited parts coverage and conditional ten-year compressor coverage for the WA14AY air conditioner when applicable registration and eligibility requirements are satisfied. Separate terms may apply to the indoor coil, electric furnace, and cabinet.

Review the documentation supplied with every component and visit the official Rheem warranty and registration portal to confirm registration deadlines, exclusions, eligibility, and available coverage.

Professional Installation Notice

The Rheem Select 4 Ton Mobile Home Straight Cool System requires professional installation. A qualified HVAC technician must confirm equipment matching, system sizing, airflow, electrical circuits, refrigerant piping, controls, clearances, condensate drainage, and compliance with local and manufactured housing codes.

Improper sizing, refrigerant charging, wiring, airflow setup, or installation can reduce performance and may affect equipment safety and warranty eligibility. Xpress Supply sells HVAC equipment but does not perform installation services.

Explore additional configurations in the mobile home straight-cool systems category.