Return Plenum 19.5×22.125
$209.73Return Plenum 19.5×22.125 provides a strong, organized connection between compatible HVAC equipment and the return-air duct system. Its four-piece construction includes L-shaped side sections and beaded panels for additional structural strength.
- Measures 19.5″ x 22.125″
- Designed for HVAC return-air applications
- Strong four-piece construction
- L-shaped side sections
- Beaded panels for added strength
- Suitable for compatible residential HVAC equipment
Goodman 4 Ton Electric HVAC System with Heat Kit – Up to 15.2 SEER2
From $4,198.11The Goodman 4 Ton Electric HVAC System combines a GLXS4BA4810 R-32 air conditioner, AMST48CU1300 multiposition air handler, and a selectable Goodman 8 kW, 10 kW, or 15 kW electric heat kit. Designed for residential straight-cool applications, this system provides approximately 48,000 BTU of nominal cooling capacity and supplemental electric heating. Professional sizing and installation are required.
4-Inch 90-Degree Elbow (Model 4BVL90)
$72.11Safely route exhaust gases from your heating equipment with the professional-grade 4-Inch 90-Degree Elbow (4BVL90). Designed for Type B gas vent systems, this double-wall elbow allows for secure and efficient directional changes in tight spaces.
- Size: 4-inch inner diameter.
- Design: 90-degree angle for precise vent routing.
- Safety: Double-wall construction maintains safe clearances to combustibles.
- Application: Ideal for gas furnaces, boilers, and water heaters.
M36G34AR – 1.5–3 Ton Manufactured Housing Uncased Coil
$1,176.61The M36G34AR is an ADP manufactured housing uncased evaporator coil for compatible 1.5–3 ton R-454B systems. It features an aluminum slab, factory-installed non-bleed TXV, and refrigerant detection system.
Supply Plenum R6 16 1/8 x 22 1/8 RP27
$105.34Supply Plenum R6 16 1/8 x 22 1/8 RP27 is a knocked-down, insulated steel plenum designed to connect compatible indoor HVAC equipment with the supply-air duct system. Its R6 insulation helps reduce heat transfer and support dependable air distribution.
- 16 1/8 x 22 1/8-inch nominal connection
- RP27 product configuration
- R6 insulated construction
- Durable steel composition
- Silver exterior finish
- Knocked-down design for assembly
- Made in the USA
10×10 Return Air Filter Grille TRU-190
$35.44The 10×10 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
18” Start Collar w/ Damper
$29.3618 Inch Start Collar with Damper creates a secure connection between a supply plenum and compatible 18-inch round ductwork. Its integrated damper allows airflow to be adjusted for improved HVAC system balancing.
- Designed for compatible 18-inch round ductwork
- Connects ductwork to a supply plenum or trunk
- Integrated manual airflow damper
- Supports HVAC system balancing
- Suitable for residential and light-commercial applications
- Ideal for new installations and replacements
6×6 Supply Grill TRU-104M
$13.17The 6×6 Supply Grill TRU-104M is a durable 4-way sidewall and ceiling register designed for balanced air distribution. It features stamped steel construction, half-inch blade spacing and a clean white powder-coated finish.
HKTSD05X1 – Goodman 5 kW Electric Heat Kit with Circuit Breaker
$122.43HKTSD05X1 is a Goodman 5 kW electric heat kit designed for compatible Goodman air handlers. It operates on 208–240V single-phase power and includes circuit-breaker protection for dependable residential heating.
- Nominal heating capacity: 5 kW
- Heating output at 240V: Approximately 16,200 BTU/h
- Electrical supply: 208–240V, single phase
- Protection: Built-in circuit breaker
- Compatible series: Select Goodman AMST and DFVE air handlers
- Application: Residential electric HVAC systems
Rheem Select 3.5 Ton Gas Split System – 80% AFUE – Upflow/Horizontal
From $4,396.22The Rheem Select 3.5 Ton Gas Split System combines a WA14AY42AJ1NA R-454B outdoor air conditioner, TCFY4821STANMC cased evaporator coil, and W801T1005A21UHSNAS 80% AFUE upflow/horizontal gas furnace. This residential straight-cool system provides approximately 42,000 BTU of nominal cooling capacity with single-stage operation. Professional sizing and installation are required.
MRCOOL DIY 12K Mini Split System – 5th Generation – 115V
$2,553.62The MRCOOL DIY 12K Mini Split System is a complete single-zone ductless heat pump with an R-454B outdoor condenser, wall-mounted indoor air handler, and 25 ft pre-charged Quick Connect® line set. This 115V inverter system provides 12,000 BTU of cooling and 12,000 BTU of heating, 23.5 SEER2 efficiency, and smart Wi-Fi control.
HKTSD10X1 – Goodman 10 kW Electric Heat Kit with Circuit Breaker
$169.93HKTSD10X1 is a Goodman 10 kW electric heat kit for compatible Goodman air handlers. It operates on 208–240V single-phase power and includes circuit-breaker protection for safe, reliable residential heating.
- Heating capacity: 10 kW
- Heating output at 240V: Approximately 34,120 BTU/h
- Electrical supply: 208–240V, single phase
- Protection: Built-in circuit breaker
- Application: Compatible Goodman air handlers
- Dimensions: 23 × 12 × 6 inches
- Weight: Approximately 10 lb
3/8 Line Set 50ft – Refrigeration Copper Coil
$135.533/8 Line Set 50ft is an individual refrigeration copper coil measuring 3/8 inch in diameter and 50 feet long. It provides flexible copper tubing for compatible HVAC refrigerant-line installations. Insulation and a second refrigerant line are not included unless separately specified.
MRCOOL DIY 24K Mini Split System – 5th Generation – 230V
$3,603.64The MRCOOL DIY 24K Mini Split System is a complete single-zone ductless heat pump with an R-454B outdoor condenser, wall-mounted indoor air handler, and 25 ft pre-charged Quick Connect® line set. This 230V inverter system provides 23,000 BTU of cooling and 23,000 BTU of heating, 22.7 SEER2 efficiency, and smart Wi-Fi control.
4BVVTH – DuraVent 4-Inch B-Vent High Wind Cap
$60.324BVVTH by DuraVent is a 4-inch high wind termination cap for compatible Type B gas vent systems. Its aluminum and galvanized steel construction provides a durable, UL-certified termination for approved gas-appliance venting installations.
507DR85 – 5” Start Collar w/ Damper
$10.29507DR85 5 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 5-inch round HVAC ductwork. Its integrated damper helps regulate airflow through the connected duct branch.
- Model: 507DR85
- Nominal collar diameter: 5 inches
- Designed for 1½″ or 2″ ductboard
- Integrated airflow damper
- Suitable for compatible HVAC duct systems
- Professional installation recommended
12×6 Supply Grill TRU-103M
$13.51The 12×6 Supply Grill TRU-103M is a durable 3-way sidewall and ceiling register designed for reliable air distribution. It features steel construction, stamped louvers, an adjustable multi-shutter damper and a clean white powder-coated finish.
14×10 High Capacity HVAC Media Filter
$173.36The 14×10 High Capacity HVAC Media Filter provides reliable filtration for compatible residential and light commercial HVAC systems. Its high-capacity media helps capture common airborne particles while supporting efficient system airflow.
36 Inch Gas Flex with Valve – 5/8″ Gas Connector
$33.2936 Inch Gas Flex with Valve provides a flexible connection for compatible gas appliances. It features a 36-inch length, 5/8-inch connector body, 1/2-inch male connections and a shutoff valve for a complete professional installation.
20x30x1 MERV 10 Pleated Air Filter
$10.63The 20x30x1 MERV 10 Pleated Air Filter helps reduce dust, pollen and other common airborne particles before they circulate through your HVAC system. Its pleated design provides dependable filtration for compatible residential and light commercial equipment.
Rheem Select 4 Ton Electric HVAC System with Heat Kit – Up to 15.2 SEER2
From $4,030.88The Rheem Select 4 Ton Electric HVAC System combines an R-454B air conditioner, multiposition air handler and 15 kW electric heat kit. This complete residential system delivers high-capacity cooling, flexible airflow and dependable supplemental heating.
4BV18 – DuraVent 4″ × 18″ Type B Gas Vent Pipe
$21.454BV18 by DuraVent is a 4″ × 18″ Type B gas vent pipe for compatible listed gas-fired appliances. Its double-wall construction features an aluminum inner liner, a durable galvanized steel exterior and UL approval.
Copper Insulation 7/8 – 1-Inch Wall x 72-Inch
$29.52Copper Insulation 7/8 is flexible, closed-cell elastomeric pipe insulation designed to help reduce energy loss and prevent condensation on HVAC refrigerant piping. It features a 7/8-inch inside diameter, 1-inch wall thickness and 72-inch length.
- 7/8-inch nominal inside diameter
- 1-inch insulation wall thickness
- 72-inch overall length
- Flexible closed-cell elastomeric construction
- Helps control condensation and moisture penetration
- Temperature range from -297°F to 220°F
- Black professional finish
Rheem Select 1.5 Ton Electric HVAC System with Heat Kit – Up to 15.2 SEER2
From $3,184.83Complete Rheem Select 1.5 Ton Electric HVAC System featuring a WA14AY R-454B air conditioner, WH2TY multiposition air handler and PROTECH 10 kW electric heat kit, with cooling efficiency ratings up to 15.2 SEER2. Designed for residential straight-cool applications and professional installation.

Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles






