Air Conditioner Systems (Electric Heat)
Gas Split System
Heat Pump Systems
Mini Split Systems
Package Units
Mobile Home Systems
AC & Heat Pump Condensers
Evaporator Coils
Air Handlers
Electric Heat Kits
Furnace
Condenser Pad
Drain Pans
Fittings & Connections
Flue Pipe
Line Set
Thermostat
PVC Pipe & Fittings
Miscellaneous Supplies
Ducting & Venting
Exhaust Fan
Flex Duct
Return Plenum
Supply Plenum
Registers & Grilles
Filters
Grilles
8” Start Collar w/ Damper
$13.79507DR88 8 Inch Start Collar with Damper creates a dependable connection between compatible ductboard and 8-inch round HVAC ductwork. Its integrated damper helps regulate airflow through the connected duct branch.
- Model: 507DR88
- Nominal diameter: 8 inches
- Designed for 1½″ or 2″ ductboard
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
M&M – 1″ x 200′ 24GA Hanger Strap
$30.13Ensure superior structural support for your heaviest HVAC ducting with the premium M&M 24GA hanger strap. Proudly manufactured in the USA from solid, non-perforated galvanized steel, this industrial-grade hanging strap provides exceptional tensile strength and lasting rust resistance for both demanding residential and commercial installations.
- Industrial Thickness: Constructed from heavy-duty 24-gauge solid steel to securely support large rigid sheet metal and heavy flexible ductwork without sagging.
- Non-Perforated Design: Solid steel continuous roll allows for custom, high-strength fastening methods tailored to specific heavy-load job site requirements.
- Corrosion Resistant: Treated with a premium galvanized finish that shields the metal from rust, moisture, and degradation in unconditioned environmental spaces.
- Extended Roll Length: Comes in a massive 200-foot continuous spool (1 inch wide), providing ample material for extensive ducting layouts while reducing waste.
New
MHCDLS40 – mFurnace™ Coil Cabinet, Downflow, Louvered Door, Solid Top, 40.25″ Height
$250.06The MHCDLS40 mFurnace Coil Cabinet is a downflow manufactured housing accessory designed to mount above a compatible electric furnace and house an approved ADP M Series evaporator coil. It features a louvered front door, solid top, 40.25-inch height, maximum rated airflow of 1,800 CFM, and space for two 20 × 20 × 1-inch pleated air filters.
10×8 Wall Supply Grill TRU-210VM
$34.42The 10×8 Wall Supply Grill TRU-210VM provides reliable air distribution from compatible HVAC supply ducts. Its durable wall-mounted design makes it a practical choice for residential and light commercial heating and cooling systems.
507DR814 – 14” Start Collar w/ Damper
$14.68507DR814 14 Inch Start Collar with Damper creates a dependable connection between a compatible HVAC mounting surface and 14-inch round ductwork. Its integrated damper allows convenient airflow adjustment during system setup and balancing.
- Model: 507DR814
- Nominal diameter: 14 inches
- Galvanized steel construction
- Integrated airflow damper
- Connects compatible round HVAC ductwork
- Professional installation recommended
20×20 Return Air Filter Grille TRU-190
$59.73The 20×20 Return Air Filter Grille TRU-190 provides a convenient return-air opening and accommodates a compatible 1-inch HVAC filter. It features stamped steel construction, a fixed hinged face and a pristine white powder-coated finish.
10×8 Supply Grill TRU-103M
$14.95The 10×8 Supply Grill TRU-103M is a durable 3-way sidewall and ceiling register designed for reliable air distribution. It features steel construction, stamped louvers, an adjustable multi-shutter damper and a clean white powder-coated finish.
BVDS4BK – FAMCO 4-Inch Black Roof Vent
$21.77BVDS4BK is a durable 4-inch black roof vent manufactured by FAMCO for bathroom fan and kitchen exhaust applications. It features UV-resistant polyethylene construction, a built-in backdraft damper, bird screen and removable connection stem.
Rheem Select 1.5 Ton Gas Split System – 80% AFUE – Upflow/Horizontal
From $4,990.95The Rheem Select 1.5 Ton Gas Split System combines a WA14AY18AJ1NA R-454B outdoor air conditioner, TCFY2414STAAMC cased evaporator coil, and W801T0503A14UHSNAS 80% AFUE upflow/horizontal gas furnace. This straight-cool split-system package is intended for residential properties that require gas heating and approximately 18,000 BTU of nominal cooling capacity. Professional sizing and installation are required.
New
M60G52AR – 5 Ton Manufactured Housing Uncased Coil / Mobile Home
$1,754.87The M60G52AR is a 5 ton ADP M Series uncased evaporator coil engineered for manufactured housing applications. It features an aluminum slab, an R-454B non-bleed heat pump and air-conditioning TXV, and a factory-installed refrigerant detection system controller and sensor. Verify the outdoor unit, furnace, airflow, and certified system match before purchasing.
Goodman 4 Ton Electric HVAC System with Heat Kit – Up to 15.2 SEER2
From $4,198.11The Goodman 4 Ton Electric HVAC System combines a GLXS4BA4810 R-32 air conditioner, AMST48CU1300 multiposition air handler, and a selectable Goodman 8 kW, 10 kW, or 15 kW electric heat kit. Designed for residential straight-cool applications, this system provides approximately 48,000 BTU of nominal cooling capacity and supplemental electric heating. Professional sizing and installation are required.
Rheem Select 3.5 Ton 14.3 SEER2 Heat Pump Condenser
$3,115.68WP14AY42AJ2NA is a Rheem Select 3.5 ton heat pump condenser engineered for efficient heating and cooling. It features 14.3 SEER2 performance with the specified equipment match, a two-stage scroll compressor, R-454B refrigerant and durable outdoor construction.
- 3.5 ton nominal capacity
- 14.3 SEER2 and 7.5 HSPF2 with specified match
- Two-stage scroll compressor
- R-454B low-GWP refrigerant
- 208/230V, single-phase operation
- Professional installation required
12” Insulated Flex Duct – R8
$136.7512 Inch Insulated Flex Duct R8 is a 25-foot flexible air duct designed for residential and light commercial HVAC systems. It features R8 fiberglass insulation, a reinforced flexible inner core, and a durable silver vapor barrier to support efficient supply or return airflow.
- Nominal diameter: 12 inches
- Overall length: 25 feet
- Insulation rating: R8
- Fiberglass insulation
- Reinforced flexible inner core
- Silver outer vapor barrier
- Suitable for supply and return-air systems
8” Insulated Flex Duct – R6
$72.098 Inch Insulated Flex Duct R6 provides a flexible air-distribution solution for compatible residential and light commercial HVAC systems. Its reinforced inner core, R6 fiberglass insulation and durable vapor barrier support reliable supply or return airflow.
- Nominal diameter: 8 inches
- Length: 25 feet
- Insulation rating: R6
- Fiberglass thermal insulation
- Reinforced flexible inner core
- Durable exterior vapor barrier
- Suitable for compatible supply and return systems
New
MRCOOL DIY Select 18K Mini Split System – 230V
$1,829.43The MRCOOL DIY Select 18K Mini Split System (230V) is a complete single-zone ductless heat pump with an R-454B outdoor condenser, wall-mounted indoor air handler, and a 11.5 ft pre-charged Quick Connect® line set. This 230V inverter system delivers 17,000 BTU of cooling, 18,000 BTU of heating, 17.3 SEER2 efficiency, and smart Wi-Fi control.
10x6x6 Register Box R6
$22.42The 10x6x6 Register Box R6 connects compatible HVAC ductwork to a supply register or grille. Its insulated construction helps reduce heat transfer and supports dependable airflow in residential and light commercial systems.
Supply Plenum R6 19 1/2 x 19 3/4 x 36
$237.73Supply Plenum R6 19 1/2 x 19 3/4 x 36 is an insulated HVAC air-distribution component designed to connect compatible indoor equipment with the supply duct system. Its R6 insulation helps reduce unwanted heat transfer and supports dependable airflow.
- 19 1/2 x 19 3/4-inch connection dimensions
- 36-inch overall length
- R6 insulated construction
- Designed for HVAC supply-air applications
- Supports efficient air distribution
- Suitable for compatible residential systems
10×10 Supply Grill TRU-104M
$18.68The 10×10 Supply Grill TRU-104M is a durable 4-way sidewall and ceiling register designed for balanced air distribution. It features stamped steel construction, an adjustable multi-shutter damper and a clean white powder-coated finish.
Rheem Select 3.5 Ton Gas Split System – 80% AFUE – Upflow/Horizontal
From $4,396.22The Rheem Select 3.5 Ton Gas Split System combines a WA14AY42AJ1NA R-454B outdoor air conditioner, TCFY4821STANMC cased evaporator coil, and W801T1005A21UHSNAS 80% AFUE upflow/horizontal gas furnace. This residential straight-cool system provides approximately 42,000 BTU of nominal cooling capacity with single-stage operation. Professional sizing and installation are required.
Rheem Select 4 Ton Multi-Position Evaporator Coil
$808.25The Rheem Select TCFY4821STANMC Evaporator Coil is a 4 ton, 21-inch cased N-coil for compatible R-454B systems. It supports four installation positions and includes aluminum construction, a factory-installed TXV, and an A2L refrigerant sensor.
